cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
521
Views
0
Helpful
2
Replies

IP Interface Within VPLS

bjberginz
Level 1
Level 1

  I was wondering if there was  way to create a layer 3 interface with an IP inside a VPLS on an ASR.  On an IOS platform, it would be like creating an SVI associated with the bridge domain.  It looks like Pseudowire Headend is close to what I'm looking to do, but that seems only realted to a single PW, not a VPLS.  I'd just like to have a layer 3 interface living inside the VPLS without having to have the traffic exit the ASR and come back in.  Thanks for any help.

1 Accepted Solution

Accepted Solutions

xthuijs
Cisco Employee
Cisco Employee

You can use a BVI for that. Functionally the same as an SVI.

Probably want a config example for that and I have that here for you: https://supportforums.cisco.com/document/59741/asr9000xr-flexible-vlan-matching-evc-vlan-tag-rewriting-irbbvi-and-defining-l2

 

regards

xander

View solution in original post

2 Replies 2

xthuijs
Cisco Employee
Cisco Employee

You can use a BVI for that. Functionally the same as an SVI.

Probably want a config example for that and I have that here for you: https://supportforums.cisco.com/document/59741/asr9000xr-flexible-vlan-matching-evc-vlan-tag-rewriting-irbbvi-and-defining-l2

 

regards

xander

Thank you, that looks like what I need.