06-22-2021 06:48 AM
I am trying to configure pseudowires using L2TPv3 but the following message appears:
show configuration failed
Tue Jun 22 08:47:38.706 PYT
!! SEMANTIC ERRORS: This configuration was rejected by
!! the system due to semantic errors. The individual
!! errors with each failed configuration command can be
!! found below.
l2vpn
pw-class TEST
encapsulation l2tpv3
!!% Invalid argument: L2TP Pseudowires not supported in this platform
protocol l2tpv3
!!% Invalid argument: Signaling incompatible with configured encapsulation method
!
!
!
end
Someone knows how to solve this problem? Currently is configured using MPLS encapsulation but the routers are connected directly and the tunnel remains down.
Solved! Go to Solution.
06-22-2021 08:30 AM
Hi Eduardo,
i checked internally at this time L2TPv3 is not supported on the NCS5500 line.
you will need to open a feature request with your account team to have this supported.
Thank you
06-22-2021 08:04 AM
06-22-2021 08:30 AM
Hi Eduardo,
i checked internally at this time L2TPv3 is not supported on the NCS5500 line.
you will need to open a feature request with your account team to have this supported.
Thank you
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: