NCS 5500 IOS XR Version 6.6.3 L2TP Pseudowires not supported

[eduardomora473]

I am trying to configure pseudowires using L2TPv3 but the following message appears:

show configuration failed

Tue Jun 22 08:47:38.706 PYT

!! SEMANTIC ERRORS: This configuration was rejected by

!! the system due to semantic errors. The individual

!! errors with each failed configuration command can be

!! found below.

l2vpn

pw-class TEST

  encapsulation l2tpv3

!!% Invalid argument: L2TP Pseudowires not supported in this platform

   protocol l2tpv3

!!% Invalid argument: Signaling incompatible with configured encapsulation method

  !

!

!

end

Someone knows how to solve this problem? Currently is configured using MPLS encapsulation but the routers are connected directly and the tunnel remains down.

[inderdeeps]

@eduardomora473 : did you check this 

https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5500/vpn/66x/b-l2vpn-cg-ncs5500-66x/b-l2vpn-cg-ncs5500-66x_chapter_01.html 

[tkarnani · Accepted solution]

Hi Eduardo,

i checked internally at this time L2TPv3 is not supported on the NCS5500 line.

you will need to open a feature request with your account team to have this supported.

Thank you