06-22-2021 06:48 AM
I am trying to configure pseudowires using L2TPv3 but the following message appears:
show configuration failed
Tue Jun 22 08:47:38.706 PYT
!! SEMANTIC ERRORS: This configuration was rejected by
!! the system due to semantic errors. The individual
!! errors with each failed configuration command can be
!! found below.
l2vpn
pw-class TEST
encapsulation l2tpv3
!!% Invalid argument: L2TP Pseudowires not supported in this platform
protocol l2tpv3
!!% Invalid argument: Signaling incompatible with configured encapsulation method
!
!
!
end
Someone knows how to solve this problem? Currently is configured using MPLS encapsulation but the routers are connected directly and the tunnel remains down.
Solved! Go to Solution.
06-22-2021 08:30 AM
Hi Eduardo,
i checked internally at this time L2TPv3 is not supported on the NCS5500 line.
you will need to open a feature request with your account team to have this supported.
Thank you
06-22-2021 08:04 AM
06-22-2021 08:30 AM
Hi Eduardo,
i checked internally at this time L2TPv3 is not supported on the NCS5500 line.
you will need to open a feature request with your account team to have this supported.
Thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide