cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
351
Views
10
Helpful
2
Replies
eduardomora473
Beginner

NCS 5500 IOS XR Version 6.6.3 L2TP Pseudowires not supported

I am trying to configure pseudowires using L2TPv3 but the following message appears:

 

show configuration failed

Tue Jun 22 08:47:38.706 PYT

!! SEMANTIC ERRORS: This configuration was rejected by

!! the system due to semantic errors. The individual

!! errors with each failed configuration command can be

!! found below.

 

 

l2vpn

pw-class TEST

  encapsulation l2tpv3

!!% Invalid argument: L2TP Pseudowires not supported in this platform

   protocol l2tpv3

!!% Invalid argument: Signaling incompatible with configured encapsulation method

  !

!

!

end

 

Someone knows how to solve this problem? Currently is configured using MPLS encapsulation but the routers are connected directly and the tunnel remains down.

1 ACCEPTED SOLUTION

Accepted Solutions
tkarnani
Cisco Employee

Hi Eduardo,

 

i checked internally at this time L2TPv3 is not supported on the NCS5500 line.

you will need to open a feature request with your account team to have this supported.

 

Thank you

View solution in original post

2 REPLIES 2
tkarnani
Cisco Employee

Hi Eduardo,

 

i checked internally at this time L2TPv3 is not supported on the NCS5500 line.

you will need to open a feature request with your account team to have this supported.

 

Thank you

View solution in original post