cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 
cancel
3843
Views
7
Helpful
2
Replies

SNMP OID

Ratheesh mv
Level 1
Level 1

I Have IOS-XR . I have total 6 BGP peers on the same box among those couple of BGP peers are belongs to global routing table(address-family IPv4 unicast) and VRF address-family .I would like to clear my doubt that is 

all BGP peers are having same SNMP OID or separate for each BGP peers or a unique for all global and a unique for all VRF ?

 

 

1 Accepted Solution

Accepted Solutions

balaji.bandi
Hall of Fame
Hall of Fame

This OID

 

BGP Peers: .1.3.6.1.2.1.15.3.1.1

 

you can see BGP identifiers  / Local address and remote address.

 

#you can also refer BGP cisco reference - need CCO id to view

 

https://snmp.cloudapps.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=1.3.6.1.2.1.15.3.1.2

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

View solution in original post

2 Replies 2

balaji.bandi
Hall of Fame
Hall of Fame

This OID

 

BGP Peers: .1.3.6.1.2.1.15.3.1.1

 

you can see BGP identifiers  / Local address and remote address.

 

#you can also refer BGP cisco reference - need CCO id to view

 

https://snmp.cloudapps.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=1.3.6.1.2.1.15.3.1.2

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

smilstea
Cisco Employee
Cisco Employee

For VRFs you need to configure SNMP contexts. Here is a good blog post about it.

https://packetpushers.net/monitoring-vrfs-on-ios-xr/

 

Sam