04-10-2019 07:26 AM
Hi all,
I'am going to upgrade my network from 5.3.3 to 6.5.3 XR version. Do i need some special SMU, or some special steps, or can i only install ADD all packages and them activate them ?
Many thx
Solved! Go to Solution.
04-10-2019 08:00 AM - edited 04-10-2019 08:01 AM
Hi Rosa
As long as you are upgrading to 6.5.3 32bit XR, the upgrade procedure should be the standard.
admin install add harddisk:/filename.tar
admin install activate *6.5.3*
Just be sure the hardware is supported
if you have trident based cards, it will not boot with 653
if you have typhoon and higher you will be fine
04-10-2019 08:00 AM - edited 04-10-2019 08:01 AM
Hi Rosa
As long as you are upgrading to 6.5.3 32bit XR, the upgrade procedure should be the standard.
admin install add harddisk:/filename.tar
admin install activate *6.5.3*
Just be sure the hardware is supported
if you have trident based cards, it will not boot with 653
if you have typhoon and higher you will be fine
04-12-2019 07:00 AM
Many thx for quickly response.
Upgrade without any issue. i did not have any of those HW. Was replaced before.
Thx
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide