Cisco Community

Nexus 3048 fails from switch(boot)# load with INIT: cannot execute

Curious what is going on. Nexus not seeming to be able to load new compact bin from bootflash.>>>>> Here is the system:sp1b# sh verCisco Nexus Operating System (NX-OS) SoftwareTAC support: http://www.cisco.com/tacDocuments: http://www.cisco.com/en/U...

VRF route target

I have a question in configuration the MP-VRF-MPLs scenario when I configure the scenario in site to site of P2P is easy because you configure the RTs for source and des and configure it in the other side in opposite site but in different scenario ...

Question about cisco C9130AXI-S configuration

Hello everyone. I have a conference room and it is equipped with a C9130AXI-S. I have searched for the installation instructions so that it can broadcast wifi in my conference room but I can't find it. So I hope everyone can help me with the installa...

source base Application filtring in FMC

as i know in fmc-ftd application control or filtering in policy is work for user --> application however does it work for server<---application. in short my source will be xyz public application and destination is my private server in this scenario f...

CSCvz27796 - MRA Registration Flaps

I spent a few hours on this one myself the other day in our lab and wanted to make this post in case it helps someone else in this situation. Post upgrade of our UCM cluster to 14.0SU1, Jabber would register but then not operate, same with IP Phon...

Fmc migration

We are planning to move the Cisco FMC server from the CentOS KVM server to the Ubuntu 22.04 KVM server. Does anyone have any document for same. Additionally what are the precaution need to take to address this

APIC configure trunk port with multiple VLANS with Ansible

Hi all,I have asked to configure many trunk interfaces for a migration to ACI.I have an excel table like this :I am using ansible to create the stati binds in order to reduce the time, there are may interfaces.My question is how to configure trunk wi...

client exclusion

Hello ,In 9800 environment, ap mode is flex is it possible to exclude a one client for a specific ssid.for ex: excluding the client for ssid (abc) but should be able to connect to xyz. Anjana

TE Agent Unable to get Dynamic IP (DNA Center)

Hallo Community I have succesfully installed TE Agent on 9400 Switch, but the problem is that it is unable to get IP Address from DHCP Server, I also tried to configure Static IP, in both cases it did not work. Without the Agent having IP address, it...

FirePower 1120 (ASA) Chassis Name Change

Dear all,how can I change the chassis name on FirePower-1120?firepower-1120 /system* # set name FirePower-1120Warning: System name modification changes FC zone name and redeploys them non-disruptivelyfirepower-1120 /system* # commit-bufferError: comm...

SDWAN VManager Moving a device to an existing Template

Hello Everyone,I need assistance with the Vmanager API, I need to reattach a device that in CLI mode to an existing template. I have used multiple API calls such as https://vmanage-ip-address/dataservice/template/device/config/attachfeature and /atta...

Request for support DevNet Sandboxes Reservation error

Hello,When I am trying to launch/Reserve a DevNet sandbox instance (any instance), I am receiving this error messeage that you can find in the attachement. Would you mind looking into it?https://devnetsandbox.cisco.com/DevNetThanks,

XRd Sandbox - BGP Status Active Not Able to Form TCP Connection

Hi Guys,I've lunched the XRd Sandbox which include multiple XRd devices as a docker containers .. I'm not able to form BGP neighborship, I assume the TCP port 179 is not open ..Do anyone faced the same issue and how to solve it ?Noting that I don't h...

ISE upgrade from 3.2 to 3.3

Hi All,I am planning to upgrade ISE (3.2.0.542) patch none to ISE 3.3 Patch 3. My question is can I directly upgrade from my current version or should I upgrade patch on my current ISE version and then upgrade to 3.3 patch 3.Pls suggest patch version...

VPC peer-link configuration for L3 routing

Hi all,I have designed a topology for a migration, but after trying it on eve-ng I found a problem. The topology is the one in figure:I have the two n9k configured with vpc domain:vpc domain 1peer-switchrole priority 8000system-priority 8000peer-keep...

October Community Update

Meet Elaine Santos, Portuguese Community Member's Choice, May-July 202

Community team @ #CiscoLiveAPJC 2024!

Community Activity