Lets say we assign 10.0.60.70 to a server inside ACI FABRIC, and we assign 10.0.60.14/28 in the Bridge Domain, will the server able to communicate outside of that BD subnet or can the traffic from 10.0.60.70 go pass 10.0.60.14/28?
I am using APIC v5.2. Recently when a switch broke down, I was not able to see the Inactive switch under:System > Dashboard > Nodes with health <= 99I am expecting to see the Inactive switch on top of the list of all Nodes.Is there a setting/configur...
Hello, Does anyone here implemented an ACI multipod farbric with 2 independant Fortinet Fortigate firewalls clusters (one cluster in each DC) and using FGCP over FGSP to synchronize sessions between the 2 clusters ? Regards
Is there any easy way to create an access port for a bare-metal server (linux) on ACI? I need to reconfigure a trunk VPC port, that was connected to a VMware ESXI server, to an access port for a single server. I've found documents that start in t...
Is there anything equivalent to the `show flow exporter` command to show the source IP address for Netflow records sent by the switch via the Cisco ACI API?
Why starting from APIC ver 5.x L4-L7 Services Tab removed?What is the impact of this on Services Graph configuration?
Hi, We have a Fabric with Coop Group Policy set to Compatible Type and we need know what is the posible impact in fabric of changing it to Strict Type. Has anyone made this change in production? Regards.
Hi community,Can multiple VLANs be used within the same EPG? I have a design where ACI needs to integrate with vCenter, which is to be used dynamic VLAN IDs within a dynamic VLAN Pool.I'm asking this because in the future, I might need to associate s...
Hi guys.Im new using Ansible, so I just copied a playbook from the Net, but when Im trying to use it, I receive an ssh error.Checked on Internet but found nothing.Have you guys experienced this issue or know how to solve? $ ansible-playbook Tenants_e...
Hi, Is it possible to advertise outside the fabric or leak to other VRF's the service bridge domain/subnet user by the PBR?If it was a normal bridge domain we'd use advertise externally/shared between VRF's and be done, but it doesn't work for this t...
We are trying to expand our cluster to support more leafs and purchased a new APIC-L4 with the VIC 1455 (APIC-PCIE-C25Q-04). We verified that the cluster and the new server are running the same version (5.3(2c). The CIMC of the new server doesn't s...
I have ip flapping issue in cisco ACI environmentas the topology:I found that when icmp reply from 168.1.37.129 to 168.1.37.45,these icmp reply packets will be sent to SW13 and SW14 at the same time,the icmp reply packets which sent to SW13 with S-I...
Hi everyone, we’re working on an ACI design and I have some questions about the best practices regarding Vlan Pools, Physical Domains and AAEP, for now we’re working on phase 1 which is Network Centric Approach. According to the Best practices guide ...
Is there any difference in functionality between N9K-C93180YC-FX and N9K-C93180YC-FX３? Thanks
We use a network-centric design. My end goal is to get an idea of how many VLANs (EPG's) & VRF's, as well as how many L3Out uplinks (routed interfaces and SVI's) there are in an existing Tenant. For the L3Out uplinks I think I just need the tDN under...
