Application Networking

I have a current load balance configuration for testing.  I want to be able to use the same virtual address, but then specify a subdirectory and have it load balance to a different serverfarm.  I'm guessing I can use the same policy map, but insert a...

Hello Experts,I'm trying to t'shoot a problem we are experiencing where a couple of thousand connections are being dropped on one of the CAS servers. It happens with no regular occurance. Is there any way I could debug on the active connections to se...

Hi Everyone,I have configured SSL offloading and redirection on a 4710 appliance. Everything works fine. The issue I am facing is that some parameters in url are getting lost. I have https://%h/%p configured as a redirect server which works fine as f...

Hi,We have a VIP for an FTP service where we do not wish to lose the Client (Source) IP for auditing purposes. So we don't source NAT and force the return traffic back to the ACE with PBR. However the return flow still bypasses the ACE VIP and straig...

Hello All,I have Cisco WAAS Express 2900 (WAAS Base IOS) at Branch & 2x512-K9 Appliances (1 CM & 1 Application Accelerator) at HO.Can we setup compression between Cisco WAAS Express Router 2900 with Cisco WAE Appliance 512-K9 ver 4.2.3c without Centr...

Hi Guys,Got a issue here with trying to authenticate a cisco waas with ASA.Below is the debug message in the asa:WCCP-EVNT:D61: Here_I_Am packet from 10.97.40.25: authentication failureWCCP-EVNT:D62: Here_I_Am packet from 10.97.40.25: authentication ...

HelloI have soms trange problems where my VRRP is moving from one css11503 to another about 2 times every minuteI get this messages in my logJUN 1 18:36:44 1/1 3781 NETMAN-2: Enterprise:Service Transition:check-uplink-downlink -> downJUN 1 18:37:10 1...

I need to setup new ACE 4710 device , after referring to "Establishing a Console Connection on the ACE" i had managed to set up initial console connection.   During installtion i had configured vlan (default vlan 1000) , interface ip adess& subnet ma...

Hi AllIm looking for some advice pleaseThe apps team have asked me about load balancing across some servers but im not that well up on it for applicationsBasically we have 4 apache web servers with about 2000 clients connecting to them, they would li...

Hi,I was wondering if it is possible to downgrade the WAAS (594) IOS to 4.3.5 version?Any help is much appreciated.

I want to create a new WAAS device group but would like to use one of the existing WAAS device group as a template.  Question, how to do that?  Is there a way to "duplicate" device group policy?  ThanksJoe

Dear All,I'm designing the network topology for a multi tiered application using Nexus 7010 with ACE 4710 and Juniper firewalls. Each tier will be in it's own VLAN and IP subnet and communications between tiers needs to be firewalled and in some case...