Application Networking

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco UCS X-Series Energy Efficiency Offer

 

Forum Posts

Dear all,we have the demand to do health checks using authentication for servers running SSL-encrypted services like imaps, smpts or pop3s. Has someone implemented tcl scripts for that ? Unfortunately the "SSL_PROBE_SCRIPT" provided by Cisco does onl...

Hi,   We are using Cisco ACE 4710 for load balancing the servers. The predictor used is 'least connections'.Have observed the below;The number of connections for a particular server in a serverfarm is 15 in the Cisco ACE.The actual number of users in...

techranga by Community Member
  • 1347 Views
  • 2 replies
  • 0 Helpful votes

Hi,We have migrated CSM to ACE Module recentlym all the applications are working fine. But one of our real server , Hosting team did NIC Teaming (Active-Active) which was working fine but not with ACE Module (Briding Mode).My assumtion is because of ...

syakshanulla by Community Member
  • 1263 Views
  • 4 replies
  • 0 Helpful votes

Resolved! CCS11503 and NAT

Hi guys,I know the CSS is too old but I have one in production environment and I was asked if it is possible to CSS to make NAT from inside addresses and translate them into one external IP address to diferent kind of communications, for example: 172...

fedefalchi by Community Member
  • 1181 Views
  • 2 replies
  • 0 Helpful votes

Resolved! DNS LB on ACE.

Hi,I would like to know if we can use sticky with DNS load balance using source IP address-sticky ip-netmask 255.255.255.255 address both XXXXX  timeout activeconns  replicate sticky  serverfarm XXXXAlso what would be the diffrent using -probe dns an...