Application Networking

Hi,I have configured CSS11501 in one-armed mode with only one server behind the VIP. After every couple of hours the connectivity to VIP Service port (80) is lost. Telnet to VIP on port 80 does not reach the server. During the same time ping to the V...

Hi All,I am doing an snmpwalk on our ACE using the following oid: /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-styl...

Is there a single command to remove the preempt option in the configuration, or other way to remove it without service interruption?ip virtual-router 1 priority 110 preemptI don't want to use the 'no' form to remove the whole command and add it back,...

Hi,I'm new to ACE Loadbalancers and am trying to configure them to eventually loadbalance two web servers running https. The intention is to let the web servers perform the SSL termination so I believe that the best way to do this is to set up the AC...

I am placing a new server farm behind my CSM -S and would like to utilize the SSL Daughter Card so that I only need one certificate for all of the servers.I am using http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/csms/2.1.1/confi...

Could somebody tell me why I can't ping to VIP within ACE Module by packet size larger than 1500 byte ? Or if it is possible to adjust the buffer size in ACE??Regards

Does WAAS support SMB2? When or what version?SMB2 is better than SMB/CIFS and can be used  between Vista/7 and Windows 2008. Also SMB2 uses newReno TCP algorithm that is better for high loss environments.Thanks

Hello,Basically, I need to know how to interpret the incident events in the event log so I can determine what parts are being flagged as illegal characters, TFTP system commands, etc., because none of the web application's functions are actually tryi...

Hi everyone,I have a issue with a sticky method in ACE loadbalancer.The ACE receives incoming connections which it sees as a single IP (proxy) and we have the following configuration:rserver host BCHAPP140  ip address 10.20.36.30  inserviceserverfarm...

We recently updated one of our servers to a new SSL certificate using the 4096 bit cipher key. Now the ACE probe to that server fails.We have SSL version set to any and SSL cipher set to any. Id there a problem with a ACE https probe not supporting c...

Hello All,I need your help on the below reqeust------------------------------------------------------------Whenever a client types in the ip address of the website:  https://a.b.c.d, they want it to redirect to their URL https://abc.com, How do we ac...

I just configured FT on our 4710's running software 4.1We currently only have 3 contexts.....Admin/Development/ReservedHowerver I only configured an FT group for the Development context.The configs seemed to have replicated to the secondary but ft gr...

Hi,I am having few questions with setting the RBAC on an ACE with an ACS (AAA servers).1. Custom attributes: according to the config guide, the following string must be specified in the customer attribute.eg. shell:Admin=Admin default-domain. This do...