Application Networking

I have a redundant set of ACE4710's and if a user is connected to a particular host behind the LB's and I take that host manually out of service via the LB the client is unable to reconnect to one of the oter servers serving the same application for ...

I have two ACE's. On the primary ACE, on the Admin context, I am getting the following message on the console:Jan 17 2011 18:14:12 : %ACE-4-106023: Deny udp src vlan999:10.XX.XX.10/50002 dst undetermined:10.XX.XX.11/50000 by access-group "#FT_VLAN_AC...

Dear Community!Please help me solving a problem regarding ACE management access. Our ACE web GUI access (not ANM, the own device manager) has become very slow and unresponsive recently (using IE browser). The CLI access and the ACE performance are OK...

Does anyone happne to know if upgrading the ACE SM from 8G to 16G will require the module replacement or just the license upgrade?Thanks...

Hi,We are doing a re-design of our network and our consultant cerated a design. And decided to use all Cisco products this time. We have a requirement to enable loadbalancing in DMZ and in Internal Network. The new design uses one ACE 4710 shared bet...

Hi EveryoneWe will be upgrading our ACE 4710s from A3(2.2) to A4(1.0). We have a pair in high availability mode. Has anyone here got any tips on how we can get a smooth upgrade without downtime? Is this even possible? ThanksA

Hallo,we have some trouble with our sticky configuration" on an ACE Module.We would like to do session persistence on an URL cookie with the name jsessionid.now, I found a presentation about HTTP cookie troubleshooting with following:=> If the cookie...

Hi ,After we upgrade WAAS we have the output of show hard disk details:Disk00 : Not Used (*)Disk01 : Not present or Not respondingAppreciate Assistance.

OK, I've got a problem that I can't figure out.Trying to make sure that NSForwarding works on the GSS before putting these into production (4492R's).  For whatever reason, A record lookups via the forwarding DNS server work, but anything else (most i...

I have a VIP built to load balance traffic to 2 SAP servers hosting the InfoViewApp. The VIP is functioning just fine, and balances traffic without a problem, but single-sign-on is not working. When a user points his/her browser to the server directl...

Hello,I had the RDP working fine with the version A2(3.1) with redundant ACE Modules.After an Upgarde to A2(3.2) all the existing RDP sessions were still working, but the ACE did not redirect any new RDP sessions. Instead other applications as HTTP a...