Application Networking

We use 2 redundant Cisco ACE loadbalancer in our datacenterThe models are ACE20-MOD-K9 with software A2(2.0)Does anybod know how to monitor the environment (cpu, memory) of such a module with snmp?We were not able to find an applicable MIB for that m...

HelloWe have 2 Cisco ACE service modules in a failover cluster configuration. The modules are running on version A2(3.0) in transparent and multicontext mode.Almost every night I see lots of following messages:Mar 30 23:59:41 <host> Mar 30 2010 23:59...

We're piloting a couple of  WAE-674 devices and I was wondering if there were a way for us to peer with a specific WAE as opposed to auto peering?Thanks..

Hello all,I have dual routers (router A and router B)each connects to a separate WAN provider and HSRP is enabled between the two routers. Here are my questions. Given that I only have one WAE module in router A and I've created a new subnet for WAAS...

I've come across a number of implementations where the ACL's associated with services 61 & 62 are using extended access-list. I am writing with specific reference to wccp configured in promiscuous mode.Since WCCP will only redirect TCP, and the WAAS ...

Hi all,        II know reverse-sticky command is not support in ACE, is there a equavient comment that i can ensure "reverse-sticky". I'm trying to loadbalance Cisco NAC servers with ACE. The NAC server LB concept should be like FWLB, i need the retu...

I have a customer that has an URL, for example www.test.com that points to different tomcat instances using other url’s, therefor I have used webhost-redirect, this works fine. But, the customer want this redirect not to be visible for the user, how ...

Folks I am new to this forum, have a question on the http header we see ACE-LB is setting set-cookie value being set on every http get response though http get request comes with a valid cookie and valid rserver same cookie has been set on get respon...

hi,one short question about the cisco css11503. is it possible to load balance access to printers with the css?i'm not sure if it's possible to load balance client access to printer.thxandré

We are running Cisco ACE A3(2.0) on our intranet and we have specific requirement for URL redirect which I need help.The http server is responding to an intranet url e.g http://test.cisco.com, this server responds to this URL. The application team wa...

Ok I've been looking at this for three days now and I can seem to fix it.  The short story is we use a CSS11503 code 7.02 as a one armed load balancer for several Proxy servers.  Generally speaking, things are working.  However, when traffic gets hea...

Hi Guys,i need to loadbalance udp application from an appliance (Arbor). But this udp application is using same source port for every new sessions. The ACE sees this as a similar session and no loadbalacing is perform?In this case, is there a method ...