Application Networking

We are deploying an ACE to LB some data center traffic.  The ACE will sit off of our core 6500 w/ SUP720.  We have multiple subnets that need to be loadbalanced that also reside on the same 6500. We have done different tests in both routed and bridge...

/* Style Definitions */ table.MsoNormalTable {mso-style-name:Standardowy; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4p...

Hello all,We have the current licenses installed on two of our 4710's:Licensed Feature                            Count------------------------------------        -----Compression Performance in Mbps             500Web Optimization Concurrent Conns. ...

Hi,I wounder if anyone could help me. I have an ACE appliace running. I have created a new Context and have done all the configuration i.e. interfaces, loadbalancing, domain, users etc. Only problem and very basic one is that I am unable to login to ...

We currently have a WAAS 7341 deployed at our central location and are in the process of upgrading that hardware to a 7371. Can I simply build the new server with the same OS version and then copy the configuration from the 7341 to the 7371, or is th...

FolksI have a client who wants to install multiple certs for a same vip. So lets say for example there are 3 urls www.xxxx.com and www.yyy.com and www.zzz.com with vip 2.2.2.2 can they install multiple certs for url but same vip? I think u can only a...

TCP/80 keepalive works fine. With default HTTP keepalive the server showed down, so Ethereal traced and discovered response was 302 not 200. Set response code to 302, but still showed down. Any ideas?service Doyle protocol tcp ip address 10.0.126.1...

Hi all,I have a WAAS network with redundant routers and am running WCCP for traffic interception and HSRP between the two routers and each router connects to a separate WAN provider and I have dual WAN connections at most locations except for two (Ch...

Hello -I was wondering if there are any performance issues with using a 4-port HCWIC ethernet module on a WAN router for connecting the WAAS device rather than trunking down to your switch? We have this deployed today in all of our remote sites using...

Hi,I have tried ot enable SNMP on a GSS 4492R-K9 running 3.1(0) software and while the status say's it's enabled it doesn't seem to be working. Viewing the Services it seems it hasn't actually started as a service: START  SERVICE 14:35  Ntp   ?    Sn...

I'm having an issue with direct server access in a one-armed, routed mode as shown below. Packets come in from the router, to the server directly.  When the server responds, the packets go to the ACE as its default gateway, and then are forwarded by ...