Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am having a weird issue with CUCM 10.5 that has me scratching my head. Mobile connect calls stop ringing at the desk phone as soon as the remote destination starts ringing, and the call is not logged as missed. Caller ID does not follow the call to...
I've been working with this for hours to no avail - I've tried installing ATM on 3 different machines, one is Windows 7 and two are Windows 10. I get the dreaded 'unable to upload WAV file' error. I have confirmed that Windows Firewall is off. confi...
Today I was attempting to back up my in-house CUCM and CXN to a Raspberry Pi which already had SSH enabled.By Default, when SSH is enabled on Pi, SFTP is enabled as well, using OpenSSH built in to Rasbian.* I kept getting this error:admin:utils disas...
I've got a wierd issue with my BE6S on inbound calls via FXO. Running the basic out-of-box SIP config.
Inbound calls ring the desk phones (hunt list) 1.5 times with caller ID
then the hunt group stops ringing for about 5 seconds, then the call ri...
I have attached a design diagram - I have 2 HQ locations with internet connections, 4500-x each advertise (into BGP) half of my /20 as a /21 but also advertise the /20 in case either side fails.
I have Palo Alto between these in Active/Active
I have...
Yep, that's the big challenge - it's a local school district bombarded with calls recently and I volunteered to help them change greetings "real quick"Figured ATM would make it fast and easy - no way to get TAC support for these fine folks
yes, though HQ1-B 4500x is distributing with higher metric
this way HQ1-A and HQ2-A are equal cost
however now they will need to be unequal cost for different sites.
this is why I was leaning towards multiple AS
