Application Networking

HiI have 2 CSS 11500 series units working in a master / slave configuration.Both units are identical in regards to hardware, IOS, etc.1 unit allows the running config to be saved by the ' copy run start' command where the other goes through the motio...

I know this is not exactly related to the CSS boxes and this might be a dumb, newbie question, but how would people go ahead in this scenario:Two or more servers behind a CSS box-to-box cluster, all servers use the same NFS NAS box for storage, and t...

Hi,I have the CMS module on my 6509 with sup1/msfc2. My problem is easy:all works (http, smtp, pop3, ...), except ftp.a easy example:I have a server on ipA. And I want to load balance ipB to ipA.I connect to ipA to ftp service (ftp works):# ncftp ipA...

Hi,I have the NM-CE with ACNS 4.2.3. I use it as standalone CE. I want to use ACNS software 5.3. Can I directly install the new software without the upgrade proccess? I have only ACNS-5.3.1.5-K9.bin, but I didn't find the ACNS-4.2.x-TO-5.x.x-K9.bin. ...

Hi,I would like some clarifications on GSLB.If we have Data Center1 (DC1) and Data Center2 (DC2) and a back end connection exists between DC1 and DC2.GSLB allows a user to be connected to DC1 or DC2 based on the availability of the servers and load b...

Hi,Maybe this is a stupid question. But I'm going to ask it anyway :)If I set the max connection on a service can I redirect the connections that are over the max connection to an error page?Or I'm I looking in the wrong place. I'll try to explain wh...

I have a strange problem on my CSS. I suspect that this started when we upgrade from 7.30 to 7.50.We have 2 CSS in an box to box redundandcy. The front end is connected to VLAN 1 the usernetwork. The backend is connected to several different VLAN, ea...

Try to use the script keepalive to check the health of a web server...No problem to connect to the web server, send a get request and receive a 302 object moved response from the web server. Is it possible to parse the response and generate the get r...

Hello,I'm trying to build a WCCP service group with a CE500 ACNS 5.2.3,Cisco Router with 12.2.8T5 and CE BlueCoat ProxySG 3.2.4.8, At this time the router can build the service just with one of them, but not with both.Do you know if there is some res...

On a CSM, I need to identify how long a session has been idle to optimize the "idle" value under the vserver configuration. I have tried the command"show module csm # conns det"It shows the state of the connection, however it does not show the idle t...

From the other conversations with this forum I understand that the routers support WCCP with GRE as the redirection option while the Catalyst family uses L2 redirection for WCCP. Is this confirmed or not. Nothing on Cisco's home page spells this on...

Hi All,I would like to understand whether the following features are supported in ACNS1. Adding multiple .pac files to the CE, so that different clients can choose different pac files. I did refer to the below but didn't answer my questionshttp://www...