Application Networking

I have a server farm listening to services for http and smtp (but on non standard ports).Customer wants to have a sorry server on the remote side (all local server fell down or are suspended - e.g. for a maintainance window).Since I have more than on...

I have this issue of CSM's going into active active state on the distribution layer boxes. The CSM's are configured in a bridged mode and cater to 66 Real Servers. STP and HSRP are configured accordingly to have Link Level as well as Box Level Redund...

When you suspend a service, does the current connections to that service remain instact and only new connections are no longer sent to that service?Or are all connections severed?I've tried to do a search for this, but I'm getting conflicting results...

We have a load balancing scenario with two RH 3.0 ES web servers behind an 11501. when we have nameservers listed on the rh servers when you try to ssh into them or open a web page the first connection take a while to get a response, but if the name ...

Is there a way to use SNMP to write out the startup config to TFTP for a CSS11506 ?

I've create the following configuration. When I tried to connect to the url http://10.0.0.10:85/dl it's working fine. I tried to access in SSL https://10.0.0.10/dl I received the cannot be dislay but if add / or /index.htm at the end of the url it's ...

There are two servers, which are Windows NT with IIS 4.0 and Windows 2003 With IIS 6.0, served by CSS 11506 running WebNS 7.20.206. The load balacing mode configured at CSS is least connection and stickiness enabled as well as flow timeout multipler ...

I need advice on which Cisco product can be used to perform web caching to reduce our internet http traffic. Thanks in advance. We have about 2000 users in the campus.Ho

HElloI would like to monitor the state (Down, Alive, Suspended) of a certain service via SNMP. Is it posible?

Hi there,I'm having a connection problem when I try to connect using the VIP-address in my browser: It occurs in two different situations (both in one-armed config. mode):P.s. Gilles I've read some of your replies but they don't seem to apply to my ...

Hi there,I know you can apply acl's to circuits, but is it possible to apply them to the management port as well?regards,Radboud

Hi,Is there anybody that knows if we can configure a real server in a server farm to be a vserver address ?What I am trying to do is the following policy ;vserv A --> serverfarm A--> Servers A --> Backup---> serverfarm B--> vserver BThen vser...