Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
In my config I have 2 default routes. By having 2 default routes does this automatically enable ECMP? If so, is there a command or script I can run to see some type of flow table information?This is on a CSS 11503.Thanks.
What are the downsides of using a one-armed LB solution? I am trunking multiple VLANs across one interface instead of using multiple interfaces to connect to my server farm. The servers still have their default gateway as the CSS.
Hi everyone,I have a task to do, and I would like to have a help.My customer need a feature on the CSM module on 6509 Switch, and the version 4.1.1 of CSM was released, and he need to implement feature of SSL on CSM, and to this, The equipment need a...
For a new web server load balancing design, I need to load balance 4 web servers to start with and more in the future. Should I place the CSS in a DMZ and run a one arm config or have the web servers direct attached to the CSS in the DMZ and run anot...
Does anyone know how to map a drive to a content engine running ACNS 5.1 with the cifs server enable and sharing all web sites. I am having trouble getting past the login window.The setup is CE 192.168.0.71CDM 192.168.0.70CR 192.168.0.72Windows XP wo...
I am working with css11506 and software 7.30.005New feature is managment routers over the managment port via command :ip management route 1.1.1.0 255.255.255.0 <next hop>if I configer logging, sntp or Tacacs on the subnet 1.1.1.0 its not working.Do I...
We are evaluate to intercept a server fault using a monitor agent and to "suspend" a real server using SNMP set. We plan to still use the CSS keep alive script.Is it possible to disable a real server using snmp set?How we can do this action?I red tha...
Hi all,We have a problem dealing using advanced-balance ssl with a CSS11501 and 2 apache servers. When we use the "balance srcip" or "balance aca" alone, it works fine. But we would like to use "advanced-balanced ssl" method, as we have to deal with ...
Hi,I have a CE507. I would like to use Cisco ACS Tacacs+ to authenticate user before allowing them to browse internet.I have use tacacs key and tacacs server command to configure the tacacs server. However, I cannot authenticate user for internet bro...
Hi, I´d like to know whether it is allowed to configure a secondary IP address on a CSS' interface, as it is on Cisco routers. If so, how can it be done?Thanks,Enrique
I need some help regarding "least connection" load balancing of 4 web servers.I configured a rule and 4 services which in generally work fine. According to my understanding of least connection, the servers should be used equally or at least in a mann...
I have a customer who is trying to load a private key from a file but can not remember the Private Key password. Does anyone have an idea of what the best way to recover this would be if its possible?
We are using a CSS11503 without SSL module and S/W-Version 7.20 Build 104.We define the following content rule: content citrix-csg.oekb.at_https add service citrix-csg.oekb.at_https_1 add service citrix-csg.oekb.at_https_2 vip address 143.245.6.101 p...
How do I disable NAT for certain ports e.g. ntp on a CSS11503? the "flow-state udp 123 nat-disable" command is not available.I'm running version 7.20.104. I'm trying to configure servers behind the CSS to reach a restrictive NTP server outside the CS...
