Application Networking

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco UCS X-Series Energy Efficiency Offer

 

Forum Posts

Hi all,I need to upgrade a pair of ACE30s to 8Gbps.According to the administration guide, there will be no impact.BUT, it states also:All license installations except one have no adverse impact to an operating ACE. http://www.cisco.com/en/US/docs/int...

HiI have a domain with two view, internal/external, I want put gss4492 to join this domain.is gss4492 can point to both view?for example, if I have two css11506s VIP with is 1.1.1.1 and 2.2.2.2 for internal view and 3.3.3.3 and 4.4.4.4 for external v...

julxu by Level 1
  • 1230 Views
  • 5 replies
  • 0 Helpful votes

HiI have configure a dns name on gss, and it points to css11506 vip, the vip point to a local server port 8080, - it is just testing.I am expecting when local server's port 8080 down, the GSS4492R will not give the vip address for the dns name? but, ...

julxu by Level 1
  • 540 Views
  • 1 replies
  • 0 Helpful votes

Hi Guys,I already have a proxy i am redirecting to for a specific product. but now i have a second proxy i have put in and i want to redirect another ACL to it.When i do:interface GigabitEthernet7/1 ip wccp 90 redirect in ip wccp 100 redirect inOnly ...

lucperreau by Level 1
  • 2025 Views
  • 11 replies
  • 0 Helpful votes

Hi all,I have a WAAS network using WCCP for traffic redirection. My dilemma is I have a 6509 at the data center with MSFC doing inter-vlan routing and two routers, each connecting to a separate WAN cloud (Sprint and Verizon). I have a route-map set u...

dtran by Level 6
  • 3625 Views
  • 4 replies
  • 0 Helpful votes

On wae (which used to work before), I am seeing this:wae#sh arpProtocol  Address          Flags      Hardware Addr     Type  InterfaceInternet  <default gw>   INV        <....................>    ARPA  GigabitEthernet1/0It cannot reach default gatewa...