Hi everyone, we're working on a scenario where we have ASA version 9.12(3)12 on one side and a Zyxel USG on the other. ASA has only a WAN while Zyxel has two WANs. VPN works fine when using Zyxel's primary WAN while tunnels fail to come upwhen using...
FYI, the Security Advisory regarding this bug (cisco-sa-3000-9000-fileaction-QtLzDRy2) contains ambiguous information. The Affected Products section says: If the command returns output, as shown in the following example, the device is vulnerable:nexu...
Worked with TAC and advised the workaround in this bug does not work. Worked with BU. They will be updating the workaround. until then here is the best way to fix this. Step1: Run below query in AWDB.Select ChangeStamp,* from Label where LabelID = 5...
We're running Adaptive Security Appliance (ASA) Software 9.13.1 on an ASA 5525x. The known fixed releases indicates 9.13.1.10 & 9.13.1.12. I can't find either of these releases available for download for my device. What is the correct course of actio...
Option 2 of this Bug starts with the following step:2) Downgrade VMware tools to 10.2.5 or earlier on the ESXi Host and reinstall VMtools via: What I am having issue with is how do I downgrade VMTools on a CUCM server? I have the 10.2.5 VMTools ISO t...
But we are running firmware version 4.4(1c) bundled in UCSM release 4.1(1c) and we still experience this issue.From 4.1(1d) to 4.4(1c) is quite a gap and the issue is still present.How and when is going to be fixed this bug?
Hi Can anyone please confirm if Cisco Nexus (N3K-C3548P-10G-SUP --- n3500-uk9.6.0.2.A8.4a.bin) is affected by Openssh vulnerability. If so what is the recommendation. BRAb
Good morning Advisory says: "A vulnerability in the HTTP client feature of Cisco IOS and IOS XE Software" and " there's no workaround"Please, how can I check in device (IOS or IOS-XE) if this " HTTP client feature" is active or used?Is it the same as...
Can anyone provide us with a way around this issue with devices on which the password was lost.The provided workaround stops the boot-loop, but does not help the user with a device recovery.
I am having the same issue. Brand new ISE boxes. Two boxes with each one running all services (PSN,PAN,MNT) in primary and secondary. If Primary box unreachable, authentication will still work, but posture fails with server issues error. TAC open bu...
Hello to all,We are running NXOS: version 7.0(3)I7(8). Even though the bug is fixed in this version, it seems that the problem still persists.I got the following error message:%SYSMGR-2-SERVICE_CRASHED: Service "callhome server" (PID 22103) hasn't ca...
