Cisco Bug Discussions

Hi, Our network contains two 4507+E Cisco switches and another two SUP 7L-E.Their IOS was cat4500e-universalk9.SPA.03.07.00.E.152-3.E.bin.MACsec technology on a communication port channel having two 3850 Stack Cisco switches was used.Afterwards, one ...

Hi, we have got a ISR4331/K9 with IOS XE 15.5(3)S4b showing the same log:   Oct 15 13:54:01.714: %IOSXE-3-PLATFORM: SIP1: cpp_cp: QFP:0.0 Thread:000 TS:00001842578982784425 %IPSEC-3-REPLAY_ERROR: IPSec SA receives anti-replay error, DP Handle 28, src...

Anyone still having this kind of issue? I have been investigating why periodically i have to cold reset the AP so that users can authenticate, its been going one for about a year.  I have had to do it to each unit in a 3 unit cluster, randomly every ...

Working on a ACE30-MOD-K9, I came across the following error when trying to SSH to another host from here:   RSA host key for X.X.X.X has changed and you have requested strict checking. Host key verification failed   Problem Description: CU hits CSCu...

Hi, This is the bug page https://bst.cloudapps.cisco.com/bugsearch/bug/CSCva63324 but essentially the bug means that a CUCM upgrade fails if the installation has had more than one version of the UKNP installed prior to the upgrade, for example if a n...

Hello,   My customer have 8851 phones Ver: 88xx-sip.12-1-1SR1-4.k3.   There is employee that have samsung galaxy S6, with the same reboots issue. Someone have this issue too with this cellphone?   Also there is Document "supported devices" for Pairin...

I came across this issue on a 2900 series router with SM-X-ES3-16-P EtherSwitch module. I was initially able to initiate a session using service-module g1/0 session and configure the switch normally. The problem arrose when changing the ROASt configu...

Will Cisco provide a fix for this bug in an upcoming firmware release to avoid having to unplug and re-plug the power cords on the 9508 spines and leafs?  If yes, does Cisco have any approximate time when the fix will be made available?   Nick Venidi...

There is a list of known fixed releases but based on my testing it doesn't work yet. I'm not aware of any "test button for callhome", has anyone else seen it? CLI command ("callhome test") still seems useless (last release I tried is 3.2.3n).

Hello community, we dealed with this bug today at Cisco SBS University. We have SG220, SG350, SG350X and SF550X all connected in one L2 segment. All switches are in the default setup with the latest FW (2.4.0.94). If they have received IP address fro...

Hello,   Could someone help me? I am stuck on this..  i want to reset the password, but also after a reboot of the ISE server it wont work   Does anyone have suggestions?   Regards.

Hello, Anyone know more details about this issue? on any upgrade do you see that problem?   It says that apply to path1 and 2, but not say any workaround and not solved in any version.   Thanks, regards  

Would be a great enhancement for german universities

The bug is still happening in Everest 16.6.4 (isr4400-universalk9.16.06.04.SPA.bin).