I am having connectivity issues with management/enterprise depending on my default gateway. Depending on which gateway I am using I will get connectivity and won't with the other port. Enterprise and Management are on different VLANs and different sw...
Forum Posts
Resolved! DNAC how to not apply some templates
Hi So you can only have one network profile per building but how do I then only apply templates to a subgroup of devices? Say I have 50 9300 switches all physically the same model and IOS-XE version and I have templates A,B,C,D. Some of the switches ...
Resolved! DNA network config question
After several hours I keep coming back to the same issue. Assigning an IP to Fiber port (enp9s0) with10.10.10.1 / 24 - GW: 10.10.10.220 (HSRP address on cores for vlan 10), and DNS IP. I use this vlan for management of Cisco network devices and it h...
Hi, I'd like to create configuration (day-n) templates with some multiline commands. The <MLTCMD> doesn't provide me the correct output for:- interface macro's- banners (containing some special characters ($,"(),#,-) I tried #INTERACTIVE mode, but th...
Resolved! L3 border handoff SDA
we are building an SDA network with two Cisco9500 Border Nodes that are connected by BGP to a fusion firewall cluster (Fortigate). When DNAC configures the L3 border handoff it uses a /30 subnet between the Border Node and the external device, in my ...
Hi Everyone,I am working on integrating Cisco DNA Center and Service Now for event management subscriptions and was wondering if anyone knows the API payload that Cisco DNA Center sends to Service now when opening an incident? I am working with our i...
I am troubleshooting intermittent Device Health scores in DNA Center, and I am trying to locate the logs that will help me troubleshoot the issue. The Audit logs available through the interface don't appear to contain any information to help in this...
I have WLC and more AP running. Clip belowhttps://www.youtube.com/watch?v=NsMqUsVUTeo&t=303sWhen assign WLC to site, I see AP impersonation: Enable. I wonder if assign WLC to site have effect to AP running.
I have enabled Wired Endpoint Data Collection in DNA Center and applied it to 100+ switches as part of the onboarding process. Subsequently, I have seen several IoT devices that failed due to the "duplicate IP" related to known issues with IP device...
Hi I am running DNA Center Version 2.3.3.7-72328 and have just noticed an odd thing with native VLANs, When you show the switch front panel view in Inventory and hover over a port one of the fields in teh box that pops up is "native VLAN". For normal...
Hi Team we have a need to create incidents in the ServiceNow for the wireless coverage SLA violation (in presence of integration between DNAC & SNow with CMDB-synch & Network Issue M&E bundles activated). we r aware such SLA violations can be discove...
HiI am trying to onboard an AP to my DNAC so that I can test the pnp process, assign it to a site and see what config is pushed to my WLC. However, when I do a wireshark on the failed attempt to register with DNAC I see a certificate expired error. ...
Hi All, We have ordered the C8300-1N1S-4T2X and T2 license has been installed & registered with Smart Account, using CSSM. However we need to bring the box offline without internet for our production environment. Below is our licenses activated. C83...
Hello,We are past the firewall issues, however, we are still not past the issue with nodes unable to mount the shared storage with the error "Cannot find path '\test' because it does not exist." where the created datastore name is "test". This is a ...
Good morning, to incorporate templates to a wlc 9800 it is through programming in DayN or is there another way... Is there a link showing how to do it? Thanks.Regards, Ciro Gustavo Mele
