04-14-2013 11:49 PM - edited 03-17-2019 03:10 PM
I have set up a CUCM cluster 9.1, a Unified IM and Presence server 9.1 and an LDAP server as well.
I can login as the users that i have created in the AD, can also chat with them and see their presence status. But i don't get a 'call' option when i right click on them.
I have enclosed a screenshot of the jabber client.
Is there something that am not doing? Kindly help if you have an idea.
06-13-2013 01:10 AM
Hi Lukasz,
I'm using UDS as we don't have the LDAP integration. So the user information is stored locally on CUCM.
What do you mean by assign some phone number to this user? THis user "51901" already has the phone number assigned to it under the end user configuration as well as the device.
TIA
06-13-2013 02:21 AM
Hi,
I'm not using UDS but from what I see in Service Profiles - Directory Profile is responsible for it. So check this settings.
EDIT: Show some screenshots from End User and Service Profile ... maybe it will help to solve it
Cheers
06-13-2013 06:41 AM
If you right click onto a contact and then click on view profile, do you see a phone number listed? can you share your xml config? If you're using UDS I would only use:
UDS
06-14-2013 01:41 AM
Hi Joshua,
I've below jabber-config.xml:
TIA
06-14-2013 04:11 AM
Show some screens from End User and Service Profile
06-12-2013 11:12 PM
Hi
By the attached imagen, first problem I see is that the client jabber is not a registered on pc on domain controller, then you should review if this user ID has as a Controlled Devices a CFS and Deskphone.
07-17-2013 12:53 AM
Hi All,
I faced the same issue after upgrading the system from UC 8.6 to 9.1 and we solved it by
Changed the UC Service profile from UCServiceProfile_Migration_2 (the default one after upgrading) to the UCServiceProfile_Migration_1. And everything is ok now.
07-31-2013 04:20 AM
I am having this problem when upgrading between 9.1 to 9.2. If I downgrade back to 9.1, the button shows up again. I upgrade, its missing. I have messed with the config files and the UCM config, and no luck. Any ideas on why this happens?
08-07-2014 07:16 PM
It should be configured line appearance on CSF device and phone number on user.
07-04-2016 01:15 PM
Just Upgraded Jabber 11.1.2 to 11.6 and all my contacts lost the Click to Cal button. The profiles don't show all the user information.
If I delete the user and re-add then it shows. I don't want to have to do this for all my contacts and for all users that end up calling me about this.
I have reset Jabber >> No change
I have removed my Cisco > Jabber Roaming profile and re-logged in. no change
going to backup a version and see
07-05-2016 07:27 AM
going back a version >> no Change.
Can't seem to find an real direction on this and most info applies to old Clients and old versions of IM.
:(
01-25-2017 08:13 AM
Had the same issue. If you right click on the contact and View Profile it should pull the numbers back.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide