06-04-2014 09:03 AM - edited 03-17-2019 04:13 PM
Hello
I have 3 servers in group, when i shut publisher,subscriber it failsover to subscriber in DR and everything work fine except jabber softphone becz CCMCIP profile when we create we get only 2 CUCM ip address options,there is no option for 3rd.
How to achieve the redundancy with DR 3rd CUCM which is active.
thanks
06-04-2014 10:44 AM
Very interesting question :)
I was researching on this, and in the guide for iPad, I see a SRV record for CCMCIP.
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPad/9_x/JABP_BK_CB31C807_00_cisco-jabber-for-ipad-931_chapter_01.pdf
Im unsure how to use this or if any other work around is available. I will research on this.
06-04-2014 12:42 PM
Dear Nissac,
the CCMCIP profile what we create in CUP there is no option to put srv record except a hostname or Ip address,
this guide is for jabber for ipad it will help for J4W also.
thanks
06-04-2014 03:16 PM
I would suggest to have the Publisher and the Sub in DR on the list of CCMCIP in CUPS
As of now we can have only 2 CCMCIP records on the CUPS server
The DNS SRV record will be used by the Jabber client when it is on MRA/Collab-edge, you need to add the DNS SRV record on your Microsoft DNS server, it cannot be added to the Cisco servers
06-05-2014 12:53 PM
Dear
The DNS SRV record will be used by the Jabber client when it is on MRA/Collab-edge,
what is MRA/Collab-edge ??
the DNS SRV record on your Microsoft DNS server, it cannot be added to the Cisco servers
yes i know that we have to create in DNS but the srv destination also need to be configured in CUPS as similar to configuration of SRV destination in SIP trunk which is between cucm and cup.
thanks
thanks
06-05-2014 01:08 PM
MRA/Collab-edge is when Jabber clients connect to the UC servers with Expressway or in short VPN'less connectivity of Jabber
You don't need to add the SRV destination to the CUPS server
06-10-2014 09:28 AM
Dear Mallaka,
So you are confirming to me that only 2 CCMCIP can be entered in CUP, so there should be manual change to the 3rd if incase pub,sub goes down.
thanks
06-11-2014 11:06 PM
Dear Experts,
Anybody can confirm me there is no way for 3rd CCMCIP IP, it has to be changed manually for jabber to work.
Thanks
07-05-2014 05:05 AM
Hi
Sorry for the delay
Yes, right now there isn't any other option
07-05-2014 05:06 AM
Thanks for confirming
07-05-2014 05:08 AM
I ll see if we can have a feature request for more CCMCIP profile servers
I ll post on the thread once i have more info
Thanks
07-05-2014 05:12 AM
I have rated for your comments on the post,
Be helpful to others, GOD will be helpful for you.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide