08-25-2023 01:10 AM
Hi Everyone,
So we have our CISCO IVR deployed in local environment, after the greeting tone in IVR we're trying the select options setup (for ex. to enter the phone number of the person you're trying to reach press 1). We have tried multiple times but the options menu and ivr digital has no effect.
I'm new to this please let me know how can we resolve this issue in brief. Also let me know if you need any other information to provide a solution of this.
Thankyou
08-25-2023 12:02 PM
Hi, I think you'll need to provide a little more information, like what version of UCCE/CVP you're on, a screenshot perhaps of the UCCE script you're using, if you're using a CVP application, etc.
Basically, what happens, are you saying your input isn't recognized or doesn't route as you expect, etc.?
08-28-2023 12:00 AM
Hi there,
Thanks for your reply. We're using UCCE 10.5 version/CVP 10.5 version. Yes the input we're providing isn't recongnized. Also, as I'm new to this I'm looking for scripts stored or you can let me know how can we find one as I have no idea for the previous one.
08-26-2023 12:40 PM
What system are you currently utilizing for your IVR? Are you using a CUC call handler, or do you have a Contact Center System such as UCCX or UCCE in place?
To offer you assistance, we would appreciate additional details.
08-28-2023 12:02 AM
Hi Ibrahim,
Thankyou for your reply! We're using UCCE 10.5 version /CVP 10.5 version in our local lab. The input we're providing isn't recongnized by the IVR. It would be helpful if I can get to know how to find stored scripts as I'm totally new to this.
Thanks.
08-28-2023 04:24 AM
Hi, so that's a start, but can you provide a screenshot of the UCCE script for instance, especially where your call ends? That could be using a CVP/VXML menu (which has its own script) or it could be using a Microapp (which doesn't)
08-28-2023 05:40 AM
Hi,
So I found this on the UCCE 10.5 instance a script. Also in CVP-COMBO10.5 version I was able to pull up the Cisco Unified Customer Voice Portal, so let me know if any settings needs to be altered to resolve this issue.
And if this isn't the correct script then I would request you to please guide me on how I can find the scripts as I have the access to both instance i.e., UCCE 10.5 and CVP-Combo 10.5.
08-28-2023 11:18 AM
You need to use the Menu or GetDigits microapp to collect DTMF from the caller. See this CVP Feature Guide for more details https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/customer_voice_portal/cvp_12_6/featureguide/ccvp_b_1261-feature-guide-writing-scripts-for-cisco/ccvp_b_1252-feature-guide-writing-scripts-for-cisco_chapter_00.html#CCVP_T...
08-28-2023 11:18 AM
So if you look at the settings on that node that says Welcome, it will likely say you're running a External Script Name, which is a micro app and not a CVP/VXML appl. Based on that setting, that dictates what menu options you receive (like say prompts 1 through 3). If you send a screenshot of that and what you're trying to enter, that will tell you what the options the system are looking for.
Also, I don't see in your script where you would use the input for the routing (i.e. press 1 goes to A, press 2 goes to B).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide