11-18-2004 07:55 AM - edited 03-13-2019 10:34 PM
I have installed IPCC Express V3.5.2 on CCM V4.0.2A.
Calls will not q to Agents. I have checked the trace files on the CRA Admin page and notice the following error message.
Failed To Load CSQ because CSQ is invalid.
Does anybody have any ideas.
Thanks
Ian.
11-18-2004 07:06 PM
Hi Ian,
If you are getting "Failed to Load CSQ because CSQ is invalid" error message in the MIVR, then the problem is Invalid CSQ Name configured in the Application configuration page in appadmin or script.
Recommended Action: Correct the CSQ Name in the script or application configuration page.
I have added the MIVR log trace from my lab system with same error for your reference.
9355: Jan 29 17:06:47.490 IST %MIVR-STEP_ICD-7-UNK:Task:50000000033 SelectResourceStep: Executing SelectResourceStep
9356: Jan 29 17:06:47.490 IST %MIVR-STEP_ICD-7-UNK:Task:50000000033 SelectResourceStep: Failed to load CSQ because CSQ: venkat is invalid
9357: Jan 29 17:06:47.490 IST %MIVR-APP_MGR-3-TASK_ABORTED:Application task aborted: Application=App[name=ICD 3060,type=Cisco Script Application,id=1,desc=ICD 3060,enabled=true,max=3,valid=true,optional=[cfgVars=[Lcom.cisco.wfapi.util.WFNameValuePair;@5c90be,script=icd.aef]],Application Trigger=ContactApplicationTrigger[time=1075376206349,contact=JTAPICallContact[id=52,type=Cisco JTAPI Call,implId=29/1,active=true,state=CALL_ANSWERED,inbound=true,handled=false,locale=en_US,aborting=false,app=App[name=ICD 3060,type=Cisco Script Application,id=1,desc=ICD 3060,enabled=true,max=3,valid=true,optional=[cfgVars=[Lcom.cisco.wfapi.util.WFNameValuePair;@5c90be,script=icd.aef]],task=50000000033,session=Session[id=0x1a8aedf410,parent=null,active=true,state=SESSION_IN_USE,time=1075376206302],seqNum=0,time=1075376206302,cn=3060,dn=null,cgn=3003,ani=null,dnis=null,clid=null,atype=DIRECT,lrd=null,ocn=3060,odn=null,uui=null,aniii=null,ced=null,route=TR[num=3060],port=TP[type=Cisco CTI Port,id=5,implId=3053,active=true,state=IN_USE],aborting=false,transferring=false,disconnecting=false]],Task id=50,000,000,033,Task Class=class com.cisco.app.impl.WFWorkflowAppDebugTaskWrapper,Exception=com.cisco.wfapi.WFExecutionException: Failed to load CSQ because CSQ: venkat is invalid
9358: Jan 29 17:06:47.490 IST %MIVR-APP_MGR-3-EXCEPTION:com.cisco.wfapi.WFExecutionException: Failed to load CSQ because CSQ: venkat is invalid
Please try the above recommended action and let me know the result.
Hope it helps
Regards
Venkat
11-19-2004 04:42 AM
Venkat,
Thanks for the reply. I'll give this a go when Im in the office next Tuesday. I'll let you know how I get on.
Ian.
11-22-2004 05:21 AM
Problem resolved.
Thanks for the info.
Ian.
02-08-2005 12:38 PM
Venka,
Anyway to trap this exception "com.cisco.wfapi.WFExecutionException" it is not listed in the OnException GoTo properties.
10-12-2020 02:06 AM
This helped me in pin pointing my issue with the invalid CSQ error, under the trigger on UCCX the DP, LOC, PT and CSS did not match the settings under CTI route point on CUCM, this changed when trigger was removed and added again but that details was never updated again. Working like a charm now again.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide