01-16-2015 11:52 AM - edited 03-14-2019 02:19 PM
Hello,
i'm getting the below error while configuring CCB in a lab in a CVP comprehensive model.
the call flow goes like the following: call manager--->SIP trunk-->voice gateway-->CVP-->ICM
172.16.15.78.1421430329246.85.CallbackEntry,01/16/2015 12:45:29.324,Validate_01,custom,Callback_Validate,ELEMENT_ENTRY
172.16.15.78.1421430329246.85.CallbackEntry,01/16/2015 12:45:29.371,Validate_01,custom,Callback_Validate,ELEMENT_ENTRY
172.16.15.78.1421430329246.85.CallbackEntry,01/16/2015 12:45:29.371,Validate_01,element,warning,addXmlBody - Error returned from probe
i read similar posts to this one, but no solution was offered except of a successful configuration that was posted online on Cisco website.
Has anybody faced the same issue and was able to know the root cause of the problem?
Any feedback would be appreciated.
Thanks.
Solved! Go to Solution.
01-17-2015 03:20 AM
Hi Fabien,
Have you configured a sip profile on the gateway ?
Courtesy callback is supported with CUBE (ISR and ASR).
Unified CVP supports ISR 15.0(1)M1.2, 15.1(4)M3, 15.2(2)T, 15.2(3)T1 and 15.2.4 M with the limitations that a "sip-profile" configuration is needed on ISR for the courtesy callback feature.
Sample configuration can be found here.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/hcs-cc/10_0_1_SU1/Install_config/HCSCC_BK_I8A8633B_00_installing-and-configuring-cisco-hcs/HCSCC_BK_I8A8633B_00_installing-and-configuring-cisco-hcs_chapter_01011.html#HCSCC_RF_RB27A02F_00
In sip-sip configuration the profile is required to send the probe header in the SIP INVITE to CVP.
regards,
Deepu
01-17-2015 03:20 AM
Hi Fabien,
Have you configured a sip profile on the gateway ?
Courtesy callback is supported with CUBE (ISR and ASR).
Unified CVP supports ISR 15.0(1)M1.2, 15.1(4)M3, 15.2(2)T, 15.2(3)T1 and 15.2.4 M with the limitations that a "sip-profile" configuration is needed on ISR for the courtesy callback feature.
Sample configuration can be found here.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/hcs-cc/10_0_1_SU1/Install_config/HCSCC_BK_I8A8633B_00_installing-and-configuring-cisco-hcs/HCSCC_BK_I8A8633B_00_installing-and-configuring-cisco-hcs_chapter_01011.html#HCSCC_RF_RB27A02F_00
In sip-sip configuration the profile is required to send the probe header in the SIP INVITE to CVP.
regards,
Deepu
01-17-2015 06:28 PM
Thank you Deepu for your prompt reply, let me give that a try on Monday and will let you know the outcome.
01-19-2015 06:46 AM
Thank you Deepu! it worked!
01-19-2015 07:47 PM
Hi Fabien,
Glad that it worked.
regards,
Deepu
01-17-2015 07:09 PM
During lab setup, I found the same error message as I missed to call the service cvp-survivability in the coming voip dial peer in the gateway.
dial-peer voice 6050 voip
description from gateway
service cvp-survivability
voice-class codec 1
incoming called-number 6050
dtmf-relay rtp-nte h245-signal h245-alphanumeric
no vad
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide