03-08-2011 05:48 AM - edited 03-14-2019 07:31 AM
Hi all,
I've created a couple blended agents (voice + IPTA skill group) in ICM. Any attempts to have voice + NIPTA will result in the attached error.
I want to have agents handling both voice & picking up emails from the NIPTA queue. Is that possible?
Thanks!
-JT-
03-08-2011 06:30 AM
I'm not keen on the non-IPTA idea at all. Haven't used it in production, and just don't see the need.
How do emails get into non-IPTA skill groups and what is their purpose?
Regards,
Geoff
03-08-2011 06:46 AM
The intention is to provide the ability to cherry pick the emails (initially) and only later on move to a fully push based routing.
Wouldn't the emails be routed to NIPTA label if its unable to find IPTA agents?
Thanks!
-JT-
03-09-2011 05:19 AM
Wouldn't the emails be routed to NIPTA label if its unable to find IPTA agents?
If that's how your script is configured, yes. Do you have a wait node followed by the NIPTA label?
But why not set up the Router MaxTimeInQueue to be long (say 5 days) and the timeout on the Media Class, and MRD to be equally long (or slightly shorter) and just let the calls stay there in the Router until an agent can take the email. If the limit is reached, calls end up in the Exception Queue and the supervisors can pull them out and requeue them.
Regards,
Geoff
03-09-2011 06:16 AM
Hi Geoff
For the supervisors to be able to pull from the expection queue i believe they have to have the admin right assigned to them in EIM. Is that correct?
Matt
03-09-2011 07:58 AM
No, they don't need as much permission as the PA. I can't quite recall what I did to make this work. Let me look into it.
Regards,
Geoff
03-09-2011 08:00 AM
No not the full PA but I believe you need to give them department Admin. I will interested if you have it configured any other way.
04-09-2011 06:30 AM
Hi JT,
Your agent that is logged into the Cisco-Voice MRD and also a NIPTA agent wouldn't be a truely "blended agent". A blended agent would be one who is logged into multiple MRDs at the same time, for example, Cisco-Voice + CIM_EIM.
When an agent logs in and is a member of more than one UCCE managed MRDs the tasks they are skilled to accept are then governed by the rules of that MRD, is it an interruptable MRD or non-interuptable. With an agent acting as a NIPTA agent, that is basically a stand-alone CIM agent and UCCE does not manage the avialability of that agent at all.
As Geoff had hinted to, there are other ways to do what you are attempting to do within UCCE scripting. For example, you can create two skills, one for more skilled agents and the other for those being trained or whom work as a back up. Off the first QueueToSkillGroup node put a wait node for the time that you want an activity to wait for the higher skilled agent. When that timer elapses, have the failure go to a second QueueToSkillGroup node which also takes into account the skill witht he agents that are acting as a backup.
Of course, that's just one idea.
Hopefully that helps you..
Kim
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide