cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
831
Views
0
Helpful
13
Replies
Highlighted
Beginner

how to configure CVP Standalone Outbound with ISR4331 and VVB11.5

My enviroment is CVP11.5, VVB11.5  ISR4331, and I want to configure an CVP Standalone Outbound Voice Application,  but in the VVB web page, I dont' know how to configure the cvp_obcallreq.tcl , when this tcl can be configured in the IOS gateway . and the VVB seems only support a few script application.  does any one konw how to configure ? or the VVB11.5 can support CVP Standalone Outbound Voice Application ?

2.png

1.png

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: how to configure CVP Standalone Outbound with ISR4331 and VVB11.5

13 REPLIES 13
Cisco Employee

Re: how to configure CVP Standalone Outbound with ISR4331 and VVB11.5

Beginner

Re: how to configure CVP Standalone Outbound with ISR4331 and VVB11.5

Dear Sir

   My Network cann't access the twitter website, could you help me paste the webpage here?

Cisco Employee

Re: how to configure CVP Standalone Outbound with ISR4331 and VVB11.5

Beginner

Re: how to configure CVP Standalone Outbound with ISR4331 and VVB11.5


Dear Sir

   Thank you very much for your help, can you give your outbound.jar for VVB?

Cisco Employee

Re: how to configure CVP Standalone Outbound with ISR4331 and VVB11.5

Have added a JAR to the Box folder for convenience.

Paul

Beginner

Re: how to configure CVP Standalone Outbound with ISR4331 and VVB11.5

dear sir

i cannt generate the makecallvvb.class or jar from your source code,could you give me the makecallvvb jar or class file you used in call studio?

-Original-

Cisco Employee

Re: how to configure CVP Standalone Outbound with ISR4331 and VVB11.5

Done.  See previous reply (5)

Beginner

Re: how to configure CVP Standalone Outbound with ISR4331 and VVB11.5

it seems ok now, thank you for your help.

Beginner

Re: how to configure CVP Standalone Outbound with ISR4331 and VVB11.5

Dear Sir

           when the cvp outbound call occured, I want the outbound application  transfer to another mobile phone. so I use your Gateway Transfer element which you shared in the cisco app box website. and load the cvp_gwfeature.tcl in the ingress gateway. but I find the result that the outbound application cann't transfer to another mobile , I don't know what's the problem , can you help me?

1.png2.png

Cisco Employee

Re: how to configure CVP Standalone Outbound with ISR4331 and VVB11.5

Unfortunately, you're trying to use two customisations on the gateway that aren't currently coded to coexist.  The solution at present is to use the standard Call Studio transfer element.  That would, of course, mean the transfer will transit the VVB rather than being performed at the gateway.  To perform a successful transfer at the gateway either the outbound TCL app would have to handoff control to cvp_gwfeature.tcl or the functionality would have to be combined into one TCL app.  All possible, just not that way at the moment.  Sorry.  I will add it onto the to-do list for consideration though.

Paul

Beginner

Re: how to configure CVP Standalone Outbound with ISR4331 and VVB11.5

Dear Sir

When I use standard Call Studio transfer element, it can't running too, do you know what's the problem ?

Best Regards

翁小森

Sean

上海声浩信息科技股份有限公司

Shanghai Sunin Information Technology Ltd.,Co.

上海市徐汇区钦州北路1088号74栋718室 北京朝阳区建国路88号现代城SOHO 6号楼1606室

电话:021-64515198-8226 电话:010-62385035

传真:021-64825366 传真:010-65618823

手机:18616701182

mail:wengxiaosen@soundhao.com

Cisco Employee

Re: how to configure CVP Standalone Outbound with ISR4331 and VVB11.5

Bit more bad news I'm afraid; you've configured a bridged transfer but the VVB doesn't currently support that, hence the outcome in the error log.  (That's one of the reasons I published the gateway based transfer customisation.)   The only non-custom option you have is a blind transfer and that is actually using a SIP Refer so my earlier statement about the transfer transiting the VVB is incorrect; it will transit at the point the Refer is consumed.

Personally, I've not tried it but I'd go about it like this:

  • Configure the transfer element for non-bridged and set the destination to a SIP URI.
  • Check the SIP messaging on the gateway to make sure you do see a REFER with Refer-To header pointing to that destination.
  • Configure the gateway to consume the Refer; set "no supplementary-service sip refer" on the outgoing dial-peer to the VVB.
  • Add your gateway dial-plan config to route to the transfer destination; simplest thing is a dial peer that will match just the user part of the Refer-To header URI but you can do full URI matching if preferred.
  • That should be enough to do the job.

Be aware that I'm out-of-office until early Jan so may not respond that quickly, but I'm sure there's others on the forum that may be able to help.

Paul

Beginner

Re: how to configure CVP Standalone Outbound with ISR4331 and VVB11.5

Hi 

 

I was trying to download the scripts required for VVB but the link is not available , can you fix it please ?

thanks

 

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards