12-06-2017 05:28 AM
My enviroment is CVP11.5, VVB11.5 ISR4331, and I want to configure an CVP Standalone Outbound Voice Application, but in the VVB web page, I dont' know how to configure the cvp_obcallreq.tcl , when this tcl can be configured in the IOS gateway . and the VVB seems only support a few script application. does any one konw how to configure ? or the VVB11.5 can support CVP Standalone Outbound Voice Application ?
Solved! Go to Solution.
12-06-2017 06:45 AM
12-06-2017 06:45 AM
12-06-2017 05:39 PM
Dear Sir
My Network cann't access the twitter website, could you help me paste the webpage here?
12-06-2017 06:16 PM
Try this https://t.co/BPgpKg4OC3
12-06-2017 07:10 PM
Dear Sir
Thank you very much for your help, can you give your outbound.jar for VVB?
12-07-2017 08:26 AM
Have added a JAR to the Box folder for convenience.
Paul
12-07-2017 01:13 PM
dear sir
i cannt generate the makecallvvb.class or jar from your source code,could you give me the makecallvvb jar or class file you used in call studio?
-Original-
12-07-2017 03:57 PM
Done. See previous reply (5)
12-07-2017 05:31 PM
it seems ok now, thank you for your help.
12-19-2017 07:30 AM
Dear Sir
when the cvp outbound call occured, I want the outbound application transfer to another mobile phone. so I use your Gateway Transfer element which you shared in the cisco app box website. and load the cvp_gwfeature.tcl in the ingress gateway. but I find the result that the outbound application cann't transfer to another mobile , I don't know what's the problem , can you help me?
12-19-2017 10:41 AM
Unfortunately, you're trying to use two customisations on the gateway that aren't currently coded to coexist. The solution at present is to use the standard Call Studio transfer element. That would, of course, mean the transfer will transit the VVB rather than being performed at the gateway. To perform a successful transfer at the gateway either the outbound TCL app would have to handoff control to cvp_gwfeature.tcl or the functionality would have to be combined into one TCL app. All possible, just not that way at the moment. Sorry. I will add it onto the to-do list for consideration though.
Paul
12-19-2017 05:04 PM
Dear Sir
When I use standard Call Studio transfer element, it can't running too, do you know what's the problem ?
Best Regards
翁小森
Sean
上海声浩信息科技股份有限公司
Shanghai Sunin Information Technology Ltd.,Co.
上海市徐汇区钦州北路1088号74栋718室 北京朝阳区建国路88号现代城SOHO 6号楼1606室
电话:021-64515198-8226 电话:010-62385035
传真:021-64825366 传真:010-65618823
手机:18616701182
mail:wengxiaosen@soundhao.com
12-20-2017 03:07 AM
Bit more bad news I'm afraid; you've configured a bridged transfer but the VVB doesn't currently support that, hence the outcome in the error log. (That's one of the reasons I published the gateway based transfer customisation.) The only non-custom option you have is a blind transfer and that is actually using a SIP Refer so my earlier statement about the transfer transiting the VVB is incorrect; it will transit at the point the Refer is consumed.
Personally, I've not tried it but I'd go about it like this:
Be aware that I'm out-of-office until early Jan so may not respond that quickly, but I'm sure there's others on the forum that may be able to help.
Paul
09-08-2019 03:45 PM
Hi
I was trying to download the scripts required for VVB but the link is not available , can you fix it please ?
thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide