09-01-2011 06:51 AM - edited 03-14-2019 08:29 AM
Hi guys,
I have a strange thing happening with our ICM 7.5.9 installation...
The Dialer Detail table for the Outbound Option deletes the records older than 15 days...
I checked the purge jobs and they all reference registry keys which have a value of 1000 + days...
This only happens with the DD table... all the other historical tables retain the data as set in the reg keys...
I have no clue where to start troubleshooting this... anyhelp is wellcome.
Solved! Go to Solution.
09-01-2011 07:26 AM
Below is the link to check the logs if the purge cycle on HDS was successful.http://www.cisco.com/en/US/products/sw/custcosw/ps1001/products_qanda_item09186a008020f1e2.shtml
So turn on the EMSTraceMask to ffff for rpl process on the AW and check the logs around
mid night it should give you some clue.
Use the ICMDBA to check the size of your hds db if it is 80%+ full it will start purging
the tables.
eg trace would look like,
09:52:39 dis-rpl Trace: 80% of the available free space is used in XX_hds database. 09:56:39 dis-rpl Trace: 80% of the available free space is used in XX_hds database. If you see similar messages expand the HDS db using the below linkhttp://www.cisco.com/en/US/products/sw/custcosw/ps1001/products_tech_note09186a0080094927.shtml
Hope this helps.
Shirish
09-01-2011 07:26 AM
Below is the link to check the logs if the purge cycle on HDS was successful.http://www.cisco.com/en/US/products/sw/custcosw/ps1001/products_qanda_item09186a008020f1e2.shtml
So turn on the EMSTraceMask to ffff for rpl process on the AW and check the logs around
mid night it should give you some clue.
Use the ICMDBA to check the size of your hds db if it is 80%+ full it will start purging
the tables.
eg trace would look like,
09:52:39 dis-rpl Trace: 80% of the available free space is used in XX_hds database. 09:56:39 dis-rpl Trace: 80% of the available free space is used in XX_hds database. If you see similar messages expand the HDS db using the below linkhttp://www.cisco.com/en/US/products/sw/custcosw/ps1001/products_tech_note09186a0080094927.shtml
Hope this helps.
Shirish
09-08-2011 05:38 AM
Thanks for the help. The HDS reached 84% ... i expanded the hds and it is writing the data as it should.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide