ICM and Peripheral gateway services doc

[Adventity BPO]

Hi,

Please some one help to get the ICM and PG component’s services documents.

for E.g.

The ICM router running the below services I need those services descriptions.

Cisco ICM Router
	Rtsvr
	Router
	AppGW
	Mdsproc
	Ccagent(InSvc   6/12 Pgs)
	Dbagent
	Testsysnc
	Dbworker

[david.macias]

Check the SRND, the information you're looking for should be there.

david

[geoff]

The ICM router running the below services I need those services descriptions. 
Cisco ICM Router
Rtsvr
Router
AppGW
Mdsproc
Ccagent(InSvc   6/12 Pgs)
Dbagent
Testsysnc
Dbworker

They are not services - they are processes. The Node Manager ensures they are restarted if they fail. The Node Manager Manager keeps the Node Manager running. Look in the registry under Node Manager\Currentversion\Processes. There is a big list, but only those ones that have the ProcDisabled set to zero will be active.

Regards,

Geoff

[Goran Selthofer · Accepted solution]

I believe this is what you need:

http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ipcc_enterprise/ipccenterprise8_0_1/configuration/guide/icm80srvg.pdf

I am uploading it to this post as well...

Go to page 81 and you will find description of those processes in the table Table 6-1: Unified ICM/CC Processes (and lots of other interesting stuff )

I am pasting only processes related to Router component here:

* router.exe

[Critical]: This is the primary Router process.

* rtsvr.exe

[Critical]: Provides real-time data feed from the Router to the Administration & Data Server

* mdsproc.exe

[Critical]: Message Delivery Service

* ccagent.exe

[Critical]: Router component that manages communication links between the router and peripheral gateways.

* dbagent.exe

[Critical]: Manages connections and transactions (configuration updates) from configuration tool(s).

* testsync.exe

[Non critical] Provides interface for component test tools.

* appgw.exe

[Optional/Critical]: The process that provides an interface for the Router to communicate with external applications.

* dbworker.exe

[Optional/Critical]: The process that provides the interface

* [NIC].exe

[Optional/Critical]: A separate process will be active for each Network Interface Controller (NIC) enabled during SETUP. The NIC process manages the interface to a telephony network.

The presence of a NIC process in a CCE deployment is very rare.

NIC process names: attnic.exe, cainnic.exe, netwrkcic.exe, crspnic.exe, cwcnic.exe, gktmpnic.exe, incrpnic.exe, mcinic.exe, gennic.exe, ntnic.exe, ntlnic.exe, sprnic.exe, ss7innic.exe, stentornic.exe, timnic.exe, unisourcenic.exe

Thanks,

Goran

Cisco TAC

[Adventity BPO]

Thanks alot Goran, this document is really us

eful.

[Gajanan Pande]

Some More elaborated documents on Router & Loggers process can be found at following URLs.

http://www.cisco.com/en/US/products/sw/custcosw/ps1001/products_tech_note09186a00800948f1.shtml

http://www.cisco.com/en/US/products/sw/custcosw/ps1001/products_tech_note09186a0080094acf.shtml

Couldnt find any docs for PG & AW, but will keep this thread posted if I come across any.

Hope it helps ?

Gajanan Pande

Cisco PDI Helpdesk.