cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1078
Views
0
Helpful
1
Replies

Issue with Mobile Agent login

Ravindra Adhav
Level 1
Level 1

Hi,

I have UCCE 11, CUCM 9 and Finesse 11. I am trying to setup Mobile Agent so that Agent can use his/her mobile phone to login to Finnese.

I have configured everything as per following guide.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/icm_enterprise/icm_enterprise_9_0_1/user/guide/UCCE_BK_UFAEED16_00_ucce-mobile-agent-guide/UCCE_BK_UFAEED16_00_ucce-mobile-agent-guide_chapter_010.html

When I am trying to sign in as Mobile Agent I get following error. My LCP ext is 43102 and LCP phone devicename is LCP5000F5001 and RCP device name is RCP5000F5002 with ext 43103. And I have added both these phones devices in controlled devices list of CUCM application user.  What is the port range for Mobile agent that should be opened on CUCM server? 

15:10:43:526 cg1A-ctisvr Trace: ProcessSetAgentStateRequest - sessionID 4
15:10:43:526 cg1A-ctisvr Trace: CSTASetAgentState: InvokeID=0x280194ac Dev=43102;90014089141454 AgentMode=LOG_IN AGID=1234 SG=-1(0xffffffff))
15:10:43:526 cg1A-ctisvr Trace: PrivateData: EventReasonCode=50004 WorkMode=4 NumAdditionalGroups=0 PositionID= SupervisorID= ClientAddress=
15:10:43:538 cg1A-ctisvr Trace:

15:10:43:538 cg1A-ctisvr Trace: CSTAUniversalFailureConfEvent: InvokeID=0x280194ac Error=GENERIC_UNSPECIFIED_REJECTION
15:10:43:538 cg1A-ctisvr Trace: PRIVATE_DATA: PeripheralErrorCode=0x27a8(10152)
15:15:00:137 cg1A-ctisvr Trace: CTIApplication::ProcessTimeNotificationEvent - Time=22:15:00 UTC NewHalfHour=FALSE
15:20:00:139 cg1A-ctisvr Trace: CTIApplication::ProcessTimeNotificationEvent - Time=22:20:00 UTC NewHalfHour=FALSE
15:21:09:792 cg1A-ctisvr Trace: ProcessSetAgentStateRequest - sessionID 4
15:21:09:792 cg1A-ctisvr Trace: CSTASetAgentState: InvokeID=0x28019621 Dev=5001;90014089141454 AgentMode=LOG_IN AGID=1234 SG=-1(0xffffffff))
15:21:09:792 cg1A-ctisvr Trace: PrivateData: EventReasonCode=50004 WorkMode=4 NumAdditionalGroups=0 PositionID= SupervisorID= ClientAddress=
15:21:09:793 cg1A-ctisvr Trace:

15:21:09:793 cg1A-ctisvr Trace: CSTAUniversalFailureConfEvent: InvokeID=0x28019621 Error=INVALID_CSTA_DEVICE_IDENTIFIER
15:21:09:793 cg1A-ctisvr Trace: PRIVATE_DATA: PeripheralErrorCode=0x27c5(10181)

1 Reply 1

Chintan Gajjar
Level 8
Level 8

The Device name for LCP and RCP should be same except the portion of LCP and RCP.

like LCPF00050001 and the respective RCP port will be named with RCPF00050001.

try the same device name and associate both with JTAPI and see if it works.