05-04-2021 03:03 AM
We need to Rebuild our UCCE Side B on a new Data Center.
There will be new IP address and host names for all UCCE components Like Rogger,AW,PGs.
Is there any documents available for the steps to be done?
Will the system sync between Sides.
05-04-2021 04:32 AM
05-20-2021 03:02 AM - edited 05-20-2021 03:16 AM
Hi Kostia,
Is it better to lockout the change during configuration data export and import between logger database ?
Also is it better to stop side A logger service ?
05-20-2021 07:34 AM
Hi Muhammed,
Your planning to do SIDE B devices so no need to stop A side services. Disable configuration changes on SIDE-A router( DBMaintenance)
Ram.S
05-23-2021 12:38 AM
There will be a IP changes for all the components. So This should be reflected in the system using the PG setup right ?
05-24-2021 12:45 AM
Hi Muhammed,
For changing the IP and Hostname for SIDE – B devices.
Once completed SIDE-B devices no need to start services. Stop SIDE-A services and open web setup for Router, Logger and AWD change SIDE-B Private & Public Ip address or Hostnames. For PG , CTI, Dialer re-run the PG setup and do the same.
Verify DNS forward and reverse lookup Devices name and Ip address in Domain controller. And modify local host entry for ICM servers ( if applicable)
Regards,
Ram.S
05-25-2021 12:39 AM - edited 05-25-2021 12:56 AM
We have configured the AW HDS Server and HDS table is in sync with existing setup. We have done initialize local database and configurations are loaded to the system. But Realtime data is not showing in the AW database (Agent Real time)
05-25-2021 01:28 AM
For Agent Real time;
Please check whether AW Sites are added in the PG explorer setup. Tick the "Agent Real time data" and "Agent Historical Data"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide