03-15-2016 06:26 PM - edited 03-15-2019 06:16 AM
I'm upgrading from UCCE 8.5 to 10.5. I have all the systems configured in the 10.5 and everything works as planned. I would like to import the HDS and Logger data from 8.5 to 10.5 and i was wondering if there is anything i should be cautions off if i use EDMT..
My major concern is that if i use EDMT the data might change the current config i have right now (Instance Name, labels, device targets, etc)
Using EDMT, i know i have to go from 8.5 to Jumpbox--> 9.0 then from the jump box to 10.5 .
Any help is greatly appreciated.
03-15-2016 06:37 PM
No.Its not supported and you need go to 9.0 then 10.5.
03-15-2016 06:40 PM
Correct, i plan on going from 9.0 to 10.5. The question i have is that would this break any of the existing configurations that i have in the 10.5 if i use EDMT to move the database over from the 8.5.
03-16-2016 12:42 AM
Any reason not going for v11? because of CTIOS?
03-19-2016 02:01 AM
Hi,
We did the same migration from hosted to Enterprise . Kindly confirm this is common upgrade ot technology refresh .
I hope this is for Technology refresh , Just make sure Logger , AWD and HDS backup are taken for safe procedure.
Below are the procedures .
Installed 2008 R2 windows server for one server
Installed SQL 2008 , no need to installed and ICM software
Install EDMT 9.0
Make sure Network connectivity from Production server to new windows 2008 R2 server
Select the migration type as Technology Refresh
Select the source and destination database and password connection
Then proceed the migration , it will take 5 to 20 minutes to completed
Take the database backup using SQL and import to 10.5 live servers .
Install 10.5 EDMT from Windows 2008 R2 live servers
Migrate the Database from 9.0 schema to 10.5 , sometime it will say your database have up to date .
Thanks & Regards,
S. Ramamoorthy
03-19-2016 08:46 AM
Thanks for the response. In my particular case, Its a little unique. The number plan is changing thereby i needed to modify the dialed number, device target, changed instance name, and change the DN for the translation routes.
One of the options i'm considering now is installing a 9.0 sprawler and utilize EDMT, update the dialed numbers and other changed names, then EDMT that to the HDS. Since the only information needed is the HDS for historical reporting.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide