03-01-2011 05:15 PM - edited 03-14-2019 07:29 AM
User is getting "Request operation failed" after answering call using CAD 8.0
03-01-2011 09:44 PM
Are they able to answer the call? Does the agent belong to a CAD workflow which has worflow actions for answer or ringing?
03-02-2011 08:38 AM
Agent can answer call. They put the caller on hold, and dial another extension, then call is disconnected. Agent does all actions using Cisco physical phone, not CAD.
Agent does belong to CAD Workflow. This new system, less than 2 weeks in use, so I'm not very familiar with the actions for answer or ringing. But this situation does seem isolated to this agent, and maybe a few others. All agents are in same CAD Workflow
03-03-2011 06:11 AM
Hi Michael,
To isolate the problem, remove CAD all together. Have the agent dial the same number without CAD started or using their ICD extension. Does the same error appear? This message can be an indicator that the number dialed is not valid. We also have a bug open where it is more of a cosemetic defect displayed;
CSCsq34070 "Request Operation failed" error was obtained on CAD
Symptom:
"Request Operation failed" error was obtained on Cisco Agent Desktop, when Cisco Agent Desktop tries to dial out to a non-existing number
Conditions:
Call initiated from Cisco Agent Desktop
Regards
Joe
03-07-2011 02:45 PM
Thanks, this worked
Mike Hubeny
Network Engineer III, IS
College of American Pathologists
325 Waukegan Road | Northfield, IL 60093 | mhubeny@cap.org
Tel: 800-323-4040 ext. 7420 | Dir: 847-832-7420| Fax: 847-832-8420 | www.cap.org
06-13-2012 03:58 AM
Good morning.
Does anyone have a work-around to prevent this pop up from displaying?? we are upgrading to uccx 8.5 and this is happening. although its not service affecting..I know it will be annoying for users everytime they dial an invalid, or just decide to hang up before completion of dialing.
Thank you
06-14-2012 04:23 AM
Well, let me ask this. when its says its fixed with no release. what does that mean..anyone?
08-08-2012 06:25 PM
I get the same problem with UCCX 8.5.1su3, any solution find?
08-09-2012 03:32 AM
Yue,
Here's the response we got beck from Cisco TAC.
As you know this issue is only cosmetic and does not in any way affect the calls, however it is unfortunate that there does not seem to be a workaround to the error message you are receiving.
regards.
so it looks like that's just the way it works....for now. good luck.
07-30-2013 07:54 PM
This issue happens in 8.5.1 SU4 when the agent places a call from their "personal non-IPCC" extension. It is really strange because CAD shouldn't be aware of the personal ext. All the stations have Jabber installed and personal Ext is the first DN on the phone.Jabber is setup to control the phone.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide