cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1444
Views
25
Helpful
10
Replies

7921/7925 Active Load shows Unknown on CUCM 9.1

fei he
Explorer
Explorer

Hi 

We have few 7921/7925 SCCP phones deployed on CUCM 9.1.1.20000-5. The Active Load shows Unknown for 7921/7925. We can see Active Load info for other handsets. It would be handy if we could see firmware load info under Active Load for 7921/7925.

Current firmware version for 7921/7925 are: CP7921G-1.4.5SR1.3.loads and CP7925G-1.4.5SR1.3.loads.

Any idea why active load shows Unknown for 7921/7925?

Cheers

Fei

2 Accepted Solutions

Accepted Solutions

Aman Soi
VIP Alumni
VIP Alumni

Hi Fei,

 

check the link if it helps.

 

https://supportforums.cisco.com/discussion/10881226/active-load-id

 

regds,

aman

View solution in original post

Rob Huffman
Hall of Fame
Hall of Fame

Hi Fei,

 

Just to add a note to the good tips from my buddy Aman (+5!)

 

I think the bug listed by Brad in this note would be applicable here smiley

 

https://supportforums.cisco.com/discussion/11430991/active-load-id

 

Cheers!

Rob

View solution in original post

10 Replies 10

Aman Soi
VIP Alumni
VIP Alumni

Hi Fei,

 

check the link if it helps.

 

https://supportforums.cisco.com/discussion/10881226/active-load-id

 

regds,

aman

Hi Aman

I read this discussion earlier before i posted.I dont think that fits to my scenarios as we are on CUCM 9.1 and 7921/7925 are all registered. Still appreciated your response.

Cheers

Hi Fei,

 

Just a thought,do you have latest Device pack loaded on CUCM? for 792X?

 

regds,

aman

Hi Aman

As i mentioned in discussion, all 792x handsets are loading latest firmware 1.4.5SR1.3.

 

Regards

Fei

Rob Huffman
Hall of Fame
Hall of Fame

Hi Fei,

 

Just to add a note to the good tips from my buddy Aman (+5!)

 

I think the bug listed by Brad in this note would be applicable here smiley

 

https://supportforums.cisco.com/discussion/11430991/active-load-id

 

Cheers!

Rob

Hi Rob

Thx for tips but we client want confirmation from Vendor. We decide to engage Cisco to find out more.

Cheers

Fei

Hi Rob,

 

thanks for sharing the bug[+5].

 

Hi Fei,please do share the findings of cisco.

 

regds,

aman

Hi Aman

Will do.

 

hi Rob/Aman

Cisco advised this is a known cosmetic issue for many 69xx and 79xx phones under CSCtc10818. But to determine whether phone is running SCCP 17, packet capture is required on CUCM but client decide to not to chase further. That's how we ends.

Thanks again.

Fei

thanks for update.

 

regds,

aman

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: