01-23-2023 11:33 PM
Hello team
i have cucm v 14 when i add the phone-on-phone screen massage ask me for activation code how i can stop this service.
thanks
Solved! Go to Solution.
01-23-2023 11:51 PM
Without searching the forum, I guess there are a lot of posts with the same question.
Again:
If you see this screen, then the phone is probably in the wrong vlan and / or doesn't get the TFTP-servers (CUCM) via DHCP-option 150.
01-23-2023 11:52 PM
Check if the phone got the Tftp ip address and communicating to the cucm.
if you added the phone manually with MAC address it will register without asking activation code.
if you configured the phone and chose activation code on phone configuration page enter the activation code and it will register
01-23-2023 11:51 PM
Without searching the forum, I guess there are a lot of posts with the same question.
Again:
If you see this screen, then the phone is probably in the wrong vlan and / or doesn't get the TFTP-servers (CUCM) via DHCP-option 150.
01-23-2023 11:52 PM
Check if the phone got the Tftp ip address and communicating to the cucm.
if you added the phone manually with MAC address it will register without asking activation code.
if you configured the phone and chose activation code on phone configuration page enter the activation code and it will register
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide