ATA 187 Release 9.2.1 MD5 Hash?

[Beth Verish]

Is there an MD5 Hash with the 9.2.1 release for the ATA 187?  I went to install the software in our development environment and it reminded me to verify the MD5 hash.  I went through the release notes and did see any reference to it.  I also had this issue with the ATA 187 9.0.3 release, except for this release the MD5 hash value in the documentation did not match the file I downloaded from the Cisco website. 

thanks,

Beth

[Rob Huffman · Accepted solution]

Hi Beth,

From the ReadMe that you can only see when you click on "Download now"''

from the Software downloads;

a1:d5:e5:65:4a:19:5d:e8:a8:68:f4:18:8f:be:0b:ef

http://www.cisco.com/web/software/282074215/51623/cmterm-ata187-9-2-1-0-readme.html

Cheers!

Rob

[clileikis · Accepted solution]

+5 Rob!

Edit:  To add to Rob's post, my last post had a different file selected and not the actual firmware file.  You can also find the firmware MD5 during the checkout procedure when downloading files from CCO:

Release	9.2(1)
Filename	cmterm-ata187.9-2-1-0.cop.sgn
Release Date	20/Jun/2011
Description	Firmware File for ATA 187 9.2(1) - Compatible CUCM Versions 7.1(5) and higher
Size	5348.62890625 KB (5476996 bytes)
Router Checksum	0x40cf
MD5	a1d5e5654a195de8a868f4188fbe0bef

HTH,

Chris

[Rob Huffman]

Hey Chris,

Thanks buddy! Right back at ya

Cheers!

Rob

[Beth Verish]

Thanks Rob and Chris for the prompt responses.  I really appreciate the information.

Beth