cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
914
Views
0
Helpful
2
Replies

CDR Field "originalcalledpartynumber"

Hi, I have this DDI 91381111 , there is a translation pattern for this 91381111 -> 805, being 805 the pilot for a hunt list.

I need to know how many incoming calls I had on 91381111 there is a translation pattern applied, the CDR field

originalCalledPartyNumber Text String      This field specifies the number to which the

                                                            original call was presented, prior to any call

                                                            forwarding. If translation rules are

                                                            configured, this number reflects the called

                                                            number after the translations have been

                                                            applied.

                                                            This field represents a numeric string of up

                                                            to 48 characters that can be either digits or

                                                            a SIP URL.

                                                            Default - empty string "". If destination

                                                            cannot be reached, this field stays empty.

Since the number appear after the translations, how can i find out about these calls?

Thanks in advance

Cesar.

1 Accepted Solution

Accepted Solutions

testeven
Cisco Employee
Cisco Employee

Hi,

Unfortunately, there is no mechanism for the CDRs to use pre-transformed called number in the CDR records instead of the transformed number.

Regards, 

Tere. 

If you find this post helpful, please rate!

Regards, Tere. If you find this post helpful, please rate! :)

View solution in original post

2 Replies 2

testeven
Cisco Employee
Cisco Employee

Hi,

Unfortunately, there is no mechanism for the CDRs to use pre-transformed called number in the CDR records instead of the transformed number.

Regards, 

Tere. 

If you find this post helpful, please rate!

Regards, Tere. If you find this post helpful, please rate! :)

Thanks !!!!