There is cluster with 1 PUB and 4 SUB. I have configured CDR/CMR server where CUCM suppose to send the CDR files. The files are sent but only for one of the SUB and not for remaining 4 servers.
we have a Cisco Unified Communication customer with a 2921 VSEC/K9 SRST router in Mexico with 2 connections1. connection to our MPLS Network for on net VOIP and Data communication2. connection to a 2nd carrier that provides SIP over DSL/IP to PSTN fo...
Please help me with the following queries. I have taken below licensesFL-CMEFL-CME-SRST-100Please let me know whether these liceses will cover the below phone models or do i need additional licenses.CP-9951-W-K9CP-8941-K9CP-6941-C-K9CP-3905CP...
We are putting in a new circuit for voice from XO Communications. It's a flex circuit coming in, so they split the data and voice at their router. It is a PRI handoff to us for voice. Their router is a cisco 2900 with a VWIC2-2MFT card. Our route...
I have this CME setup that has a hunting feature, when outside or inside calls a DID number/operator , the call will use the followingephone-hunt 1 longest idle pilot 0 list 123, 456, 789 timeout 10, 10, 10Now customer wants to enable call forward fe...
I'm having a hard time wrapping my head around a topic that has become a hot button issue. I need to be able to push CID to the PSTN. This wiki page explains what changes to make on call manager(4.x), but it says nothing about gateways:http://suppo...
A Cisco IPsec VPN tunnel is setup between Avaya call manager and Avaya G9611. G9611 phone gets all the settings from the call manager but no dial tone. Cisco ASA has allow any to any on TCP/UDP ports and IP addresses. Computer is working fine on t...
Hello All,I've researched this quite a bit and I can't quite get the answer that I'm looking for. Perhaps it's because I'm fairly new to the voice world, but I digress. Here are the particulars.CUCM v7.1.2Unity v7.0(2)So here's the request.When a g...
I heard a rumour that the maximum RTT between servers in a UCM cluster had been increased to 160msec.Does anyone have any confirmation of this and which version releases support it if true?Chris
Greetings!Recently we finished installing our CuCM upgrade to 8.5 as well as unity connection 8.5. One of the main questions that have come up now, because this is a bastardized version of Linux, is are the regular security patches for the OS the sa...
Hello,Don't know why but I seem to be having a lot of problems with getting CUCM 8.6 to successfully register with my 2851 GW router. It's my understanding that it should be relatively straightforward and easy. Here were my steps,1) Add GW in CUCM, i...
Dear All,We have a requirement to have a weather audio alert system on cisco ip phones. All the phones should receive some kind of audio alert (beep,messages) if there's any weather change. Is it possible to do it without using third party applicatio...
Need to understand why when I'm on an IP Communicator call on line 1 and a new call rings on another line the connected call drops. I'm not automatically connected with the ringing call I still need to click on the line button to ...
