02-24-2017 12:08 PM - edited 03-17-2019 09:38 AM
02-24-2017 08:03 PM
Hi Saeed,
It shows TCP timeout which points to some network issue where most likely the keepalives/acks are being missed between cucm and this IP phone. To be able to pinpoint the issue you need to setup a parallel packet capture on the IP phone and cucm to see the direction in which the packets are being dropped.
HTH
Manish
05-02-2017 12:39 PM
I have the same issue and have opened a support ticket with Cisco to address.
Will report back on my findings.
06-06-2017 02:53 AM
Hi Dennis,
Have you managed to solve this problem?
I've similar issue it Cisco 7821.
Regards
MC
06-06-2017 08:16 AM
Cisco TAC could not provide a root cause of this issue.
The phone's Debug display had the following error:
ReasonForOutOfService=10
A search for the error returns the following: ReasonForOutOfService=10 -- TCPtimedOut - The TCP connection to the Cisco Unified Communication Manager experienced a timeout error
It was hypothesized that the phone's firmware became corrupt.
I've been able to get the phone to register by bringing the phone back into the office so that it registered on the LAN.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide