12-14-2012 09:31 AM - edited 03-16-2019 02:44 PM
Hi there,
I am trying to install CUP8.6(4) on the MCS 7825H3 server but it fails and gives error message that "There are no deployments provided by this software that support this hardware" I have also attached picture.
I have had already run the Media Check and that passed so it very strange. My second question is do I have to build RAID first before start installation because I see NO RAID disk message during the installation.
Thanks
Solved! Go to Solution.
12-14-2012 09:38 AM
Hi Muhammad,
Here is the hardware vs software compatibility matrix for CUPS 8.x:
You need to have 6GB of memory for this to install successfully.
As for the RAID query, please refer to the install guide which talks about the same:
HTH.
Regards,
Harmit.
12-14-2012 09:40 AM
Check out the compatibility info:
http://www.cisco.com/en/US/docs/voice_ip_comm/cups/8_0/english/compatibility/cupcompatibility8x.html
How much RAM does the server have?
Media check only checks the checksum of the file, it does not validate the hardware.
HTH,
Chris
12-14-2012 09:38 AM
Hi Muhammad,
Here is the hardware vs software compatibility matrix for CUPS 8.x:
You need to have 6GB of memory for this to install successfully.
As for the RAID query, please refer to the install guide which talks about the same:
HTH.
Regards,
Harmit.
12-14-2012 09:47 AM
So is that means we dont need to configure RAID for MCS 7825H3, it will be done by system installer during the installation?
12-14-2012 09:40 AM
Check out the compatibility info:
http://www.cisco.com/en/US/docs/voice_ip_comm/cups/8_0/english/compatibility/cupcompatibility8x.html
How much RAM does the server have?
Media check only checks the checksum of the file, it does not validate the hardware.
HTH,
Chris
12-14-2012 09:45 AM
Chris
Server has 2GB RAM installed on it
12-14-2012 09:54 AM
That is your problem, see the notes in the compatibility guide on RAM requirements.
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide