04-25-2007 08:00 PM - edited 03-14-2019 09:09 PM
-2851 12.4(11)T1
-CME 4.0(2)
-7941 firmware 8.2(2)
when I reset (or restart) the 7941GE IP phones, always show shortly the message 'error update locale' just before boot up successfully.
Looks everything operational but want to know why I have this message. Any configuration in CME related to this message?
Thanks in advance,
04-26-2007 02:09 AM
Please enable "term mon" and "debug tftp-event" to see which files the phones is trying to download. Then you can download the appropriate locale archive from CCO, copy the files to the router, and configure tftp-server with alias (to support the directories in the filenames) so that the phone will successfully download the locale files.
Hope this helps, if so please rate post!
05-18-2018 12:52 AM
Please see under "voice register global" the parameter "authenticate register" is present.
It should be like:
voice register global
mode cme
source-address x.x.x.x port 2000
max-dn 20
max-pool 10
load 7942 SIP42.9-2-1S
load 9971 sip9971.9-3-1-33
authenticate register
mwi stutter
tftp-path flash:
file text
create profile sync 0060502054170362
!
05-18-2018 01:56 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide