cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
365
Views
0
Helpful
4
Replies
Enthusiast

CME9.1 - Transfer to monitor line on 8941 fails

I have configured "transfer-system full-consult dss"
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmetrans.html#wp1102676


When a call arrives on one of my customer's 7962 phones, this works as expected: I can transfer a call to an idle monitored line by pressing the "transfer" softkey, followed by the Button of the Monitored line (either as consult or blind transfer)


If a call arrives on a 8941 (running sccp.9-3-2-11), I cannot transfer a call to a monitored line: I press the "transfer" hardkey (caller gets put on hold), and after pressing the button of the monitored line a second call is placed as expected. I can however not transfer the call (e.g. pressing the "transfer" hardkey does not do anything)

If the DN of the Monitored line is manually entered, the transfer works (either by the "transfer" hardkey, or the "transfer" softkey). Both 7962 and 8941 are configured identically in CME.


Not sure what kind of limitation I run into. Any help is greatly appreciated.

Cheers
/David

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Master

Re: CME9.1 - Transfer to monitor line on 8941 fails

Instead of button m: , try configuring lines as "blf-speed-dial".

View solution in original post

4 REPLIES 4
Highlighted
Enthusiast

Re: CME9.1 - Transfer to monitor line on 8941 fails

Turns out this is a known defect:

CSCue18714    DSS transfer does not work with 8941

Highlighted
Hall of Fame Master

Re: CME9.1 - Transfer to monitor line on 8941 fails

Instead of button m: , try configuring lines as "blf-speed-dial".

View solution in original post

Highlighted
Enthusiast

CME9.1 - Transfer to monitor line on 8941 fails

Thanks Paolo,

It was by chance that I found out "blf-speed-dial" actually works around the issue with the monitoring line.

Highlighted
Hall of Fame Master

CME9.1 - Transfer to monitor line on 8941 fails

Glad to know, thanks for the nice rating and good luck!

CreatePlease to create content