12-24-2015 07:29 AM - edited 03-17-2019 05:19 AM
Hello,
I have deployed CUCM 11.0.1 in our company and I have configured a conference Now for some users to test this new feature.
I'm asking for the way to configure an announcement in Conference Now when a join the conference.
Actually when I join the meeting I dont have announcement like WebEx.
It's possible to do that configuartion ?
Best regards
Majed
Solved! Go to Solution.
12-24-2015 09:54 AM
Majeed
This is not feasible using just CUCM.
Br,
nadeem
PS: Please rate all useful post.
12-24-2015 08:27 AM
Majed,
Under the Conference Now feature there is no such provision as of now that "Caller X has joined" will be played to the existing participants as it happens on Webex Audio. What only they will listen to is conference party entry and exit tone. Complete details about the feature can be found below:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_0_1/featureConfig/CUCM_BK_FE5123E0_00_cucm-feature-configuration-guide_1101/conference_now.html
http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/200181-Configure-Conference-Now-Feature-on-CUCM.html
Regards
Deepak
- Rate Helpful Posts -
12-28-2015 04:25 AM
Hello Guys ,
Thanks for your feedback is very helpful.
BR
Majed
12-24-2015 08:33 AM
Hi Majed,
Are you referring to beep sound while entering a meeting? If so, then you need to enable at line level of directory.
Once it is set to On—A tone plays on the phone when a basic call changes to a multi-party call; that is, a barge call, cBarge call, ad hoc conference, meet-me conference, or a joined call. In addition, a different tone plays when a party leaves the multi-party call. If the controlling device, that is, the originator of the multi-party call has a built-in bridge, the tone gets played to all parties if you choose On for the controlling device. When the controlling device leaves the call, Cisco Unified Communications Manager identifies whether another device on the call can play the tone; if another device on the call can play the tone, Cisco Unified Communications Manager plays the tone. If the controlling device cannot play the tone, Cisco Unified Communications Manager does not play the tone even if you enable the party entrance tone feature.
Thanks!
Kunal
12-24-2015 09:54 AM
Majeed
This is not feasible using just CUCM.
Br,
nadeem
PS: Please rate all useful post.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide