CUCM 10.5 - PLM - Certificate Error

[wilsonsant]

Hi Guys, 

The PLM page is presenting error certificate. I verified the NTP and is syncrhonized.  I believe that the problem is related with date. When I try

change the date is requested for me delete all NTP, but, when I try to delete the CUM don´t let. 

admin:set date 15:32?
Syntax:
set date HH:mm:ss:MM/DD/YY

HH:mm:ss : The time format (24 hours format)
MM/DD/YY : The date format.

Note: Following format is also accepted:
MM/DD/YYYY : The date format.

admin:set date 15:32:00/02/07/2017
This server, is configured to synchronize with external NTP
server(s). Date/time cannot be changed on this server.

Please delete all of the configured external NTP servers.

Command is unsuccessful.
admin:
admin:
admin:utils ntp server delete
1: 10.12.1.1
a: all
q: quit

Choice: 1

Restart NTP (y/n): y

10.12.1.1 will be deleted from the list of configured NTP servers.
Continue (y/n)?y

10.12.1.1 : [The NTP server was not deleted. At least one NTP server is required.]

I used the information about two links without sucess:

https://supportforums.cisco.com/discussion/12104251/security-error

http://www.cisco.com/c/en/us/support/docs/cloud-systems-management/prime-license-manager/200224-Troubleshoot-Common-Issues-in-ELM-PLM.html

Any have idea, about this?

Thanks

Wilson

[Chris Deren · Accepted solution]

What is the error you are getting?

Post a screen shot and the exact URL you are accessing.

Do you have self signed Tomcat cert or is the cert signed by trusted CA?

[wilsonsant]

Hi Chris,

Thanks a lot for Your contact. After to do post, I change the date in Gateway (the gateway was

wrong time) and the solve problem. The CUCM that I am doing test is related my laboratory.

The message was "Error certificate"

Thanks,

Wilson