06-04-2014 12:40 PM - edited 03-16-2019 11:00 PM
Hello,
I am running call manager 7.1.3. We also have a CER server setup and today when we dial 911 it goes to my extension. I am fairly new to call manager. Is there a way I can trace the call to figure out why the calls are not going out the gateways and to my extension.
Where can I go to see why my extension is even there and at least change it to go to the front desk.
Phone system is running fine and we are receiving inbound and outbound calls.
Solved! Go to Solution.
06-05-2014 07:30 AM
Yep, start with DNA to locate the match on 911 from your phone's CSS.
If it is going to CER, then I'd guess your phones are in a ERL (likely Default) that is set to alert onsite only. Check CER Default ERL, and Onsite notifications.
Also if your gateways changed since CER's installation, the CER config should be reviewed.
To answer your question, if you're set up as the onsite alert go into CER > ERL > Onsite Alert Settings and look for your DN in there. You can change it to the front desk or security if you want... and test test test.
06-04-2014 02:34 PM
I would look at Dialed number analyzer. https://cucmip/dna. If the webpage doesnt come up, you will want to start the service from Cisco Unified Serviceability.
06-05-2014 07:30 AM
Yep, start with DNA to locate the match on 911 from your phone's CSS.
If it is going to CER, then I'd guess your phones are in a ERL (likely Default) that is set to alert onsite only. Check CER Default ERL, and Onsite notifications.
Also if your gateways changed since CER's installation, the CER config should be reviewed.
To answer your question, if you're set up as the onsite alert go into CER > ERL > Onsite Alert Settings and look for your DN in there. You can change it to the front desk or security if you want... and test test test.
06-05-2014 05:55 AM
Just to clarify, are you receiving the end users 911 calls or are you getting a call from CER informing you that someone made a call to 911?
Regards,
Yosh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide