**ERROR**: CCPMSG_InCall: ChannelID IE invalid 100(0x64) in SIP voice gateway

[dadahit3000]

Hi all,

I am configuring a SIP voice gateway. After finsihing the config, the outbound calls are working properly. But I met some issue for inbound calls.

There is no debug log for show ccsip message and show voice dialpeer command. Only q931 has the debug log.

Can any one have any idea for this issue?

below is the debug shows for show isdn q931.

   Jun  1 05:27:49.435: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8  callref = 0x03A3

Sending Complete

Bearer Capability i = 0x8090A3

Standard = CCITT

Transfer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xE1858384

Preferred, Interface 5, Channel 4

Calling Party Number i = 0x2181, '18600586101'

Plan:ISDN, Type:National

Called Party Number i = 0xC1, '82197910'

Plan:ISDN, Type:Subscriber(local)

High Layer Compat i = 0x9181

High Layer Compat i = 0x9181

Jun  1 05:27:49.439: ISDN Se0/0/0:15 Q931: Received SETUP  callref = 0x83A3 callID = 0x0004 switch = primary-net5 interface = User

d8w-sr-2811f20a-vpn#

Jun  1 05:27:49.439: ISDN Se0/0/0:15 **ERROR**: CCPMSG_InCall: ChannelID IE invalid 100(0x64) rejecting call

Jun  1 05:27:49.443: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd = 8  callref = 0x83A3

Cause i = 0x80E418 - Invalid information element contents

下午01:28:17: Zhuliang: Jun  1 05:27:49.439: ISDN Se0/0/0:15 **ERROR**: CCPMSG_InCall: ChannelID IE invalid 100(0x64) rejecting call

Jun  1 05:27:49.443: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd = 8  callref = 0x83A3

Cause i = 0x80E418 - Invalid information element contents  

[acampbell]

Hi,

**ERROR**.CCPMSG - searching CCO seems always to show that these are IOS software bugs.

Firstly upgrade the router to the latest IOS from Cisco that will fit your DRAM & FLASH.

Retest

Regards,
Alex.
Please rate useful posts.

[Paul YF Keung]

Any update.

Sent from Cisco Technical Support iPad App

[paolo bevilacqua]

 Channel ID i = 0xE1858384 
 Preferred, Interface 5, Channel 4 
Jun  1 05:27:49.443: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd = 8  callref = 0x83A3 
 Cause i = 0x80E418 - Invalid information element contents
下午01:28:17: Zhuliang: Jun  1 05:27:49.439: ISDN Se0/0/0:15 **ERROR**: CCPMSG_InCall: ChannelID IE invalid 100(0x64) rejecting call
Jun  1 05:27:49.443: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd = 8  callref = 0x83A3 
 Cause i = 0x80E418 - Invalid information element contents   

To what are you connecting? Call comes with explicit interface indicator IE, that is not normal for ISDN E1.

[Shalid Kurunnan Chalil]

Hi ,

did you find solution for this.

i am facing the same issue with E1.

Plan:ISDN, Type:Subscriber(local)

000108: Jan 21 21:27:21.233: ISDN Se0/1/0:15 Q931: Received SETUP  callref = 0x82FE callID = 0x0002 switch = primary-ni interface = User

000109: Jan 21 21:27:21.233: ISDN Se0/1/0:15 **ERROR**: CCPMSG_InCall: ChannelID IE invalid 100(0x64) rejecting call

000110: Jan 21 21:27:21.233: ISDN Se0/1/0:15 Q931: TX -> RELEASE_COMP pd = 8  callref = 0x82FE

         Cause i = 0x80E418 - Invalid information element contents

Regards,

Shalid K.C